{"title":"Universal turbos \u0026 turbo kits","description":"\u003cp\u003e\u003cstrong\u003eUniversal turbos and turbo kits\u003c\/strong\u003e for tuning and project cars: from the T25\/T28 and T3\/T4 (T04E) to the GT2871, GT3037\/GT3076, GT3582 and big GT45 turbos for 600+ hp. Also complete kits with exhaust manifold, intercooler and oil lines, for example for the BMW E36\/E46, Honda D-series, VW\/Audi 1.8T and Nissan Patrol TD42. Billet compressor wheels, journal and ball bearing versions, V-band or 4-bolt connection.\u003c\/p\u003e\n\u003ch3\u003eWhich turbo suits your power target?\u003c\/h3\u003e\n\u003cp\u003eChoose the turbo based on engine displacement and desired power, not on size alone. For 1.5-2.0L engines up to around 350 hp, a T25\/GT28 is a logical choice with quick response; a T3\/T4 or GT30 suits 1.8-3.0L and 300-500 hp; the GT35 and GT45 are intended for large six- and eight-cylinder engines. Pay attention to the A\/R value: a smaller turbine housing A\/R spools up earlier, a larger one gives more top-end power. Ball bearing turbos respond faster and tolerate higher revs, journal bearings are robust and affordable. Always allow for supporting work: the fuel system, engine management and cooling need to grow along with it.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhy buy from us:\u003c\/strong\u003e local stock, warranty on manufacturing defects and Netherlands-based customer service.\u003c\/p\u003e\n\u003cp\u003eAlso of interest: \u003ca href=\"\/en\/collections\/turbos\"\u003eturbos by make\u003c\/a\u003e, \u003ca href=\"\/en\/collections\/intercoolers\"\u003eintercoolers \u0026amp; blow-off\u003c\/a\u003e and \u003ca href=\"\/en\/collections\/turbo-toebehoren\"\u003eturbo accessories\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u0026nbsp;\u003c\/p\u003e","products":[{"product_id":"t3-t4-turbo-63-ar-oil-hybrid-v-band-universal-turbocharger-for-4-6-cyl-tcd","title":"Universal turbo T3\/T4 T04E V-band A\/R 0.63 internal wastegate up to 420 hp compatible with Audi VW 1.8T VR6","description":"\u003ch3\u003eProduct description\u003c\/h3\u003e\u003cp\u003eUniversal T3\/T4 (T04E) hybrid street turbo with T3 inlet flange, V-band outlet flange and internal wastegate, designed to increase engine power or replace a worn original turbo. Oil cooled, up to approx. 420 hp. This is not a vehicle-specific part; modifications may be required.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFits:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eUniversal: 4- and 6-cylinder engines (suitability depends on displacement and power target; have the turbo choice assessed beforehand)\u003c\/li\u003e\u003cli\u003eAudi \/ VW 1.8T and VR6 (universal application)\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eOEM \/ part number:\u003c\/strong\u003e no vehicle-specific OEM number; turbo model T3\/T4 T04E\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eExhaust inlet flange (turbo manifold):\u003c\/strong\u003e T3, 4-bolt\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eExhaust outlet flange (downpipe):\u003c\/strong\u003e V-band (2.5\/3.1 inch)\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eTurbine:\u003c\/strong\u003e trim 74.2, A\/R 0.63, inducer 64.8 mm, exducer 55.8 mm, outlet 79 mm, inlet 44.7 mm \/ 85.8 mm\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eCompressor:\u003c\/strong\u003e trim 48.1, A\/R 0.5, inducer 52.7 mm, exducer 76 mm, outlet 78 mm, inlet 51.5 mm\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eBearing type:\u003c\/strong\u003e journal bearing, wet floating\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eCooling:\u003c\/strong\u003e oil cooled\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eWastegate:\u003c\/strong\u003e internal wastegate\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eOil inlet:\u003c\/strong\u003e M12x1.25 and 2x M8x1.25\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eOil outlet:\u003c\/strong\u003e 2x M8x1.25\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003ePower:\u003c\/strong\u003e up to approx. 420 hp\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eQuantity:\u003c\/strong\u003e 1 turbocharger with required gaskets\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eCondition:\u003c\/strong\u003e New\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eWarranty:\u003c\/strong\u003e 1 year on manufacturing defects\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eTurbine housing of ductile cast iron QT450-10, heat resistant up to 700 °C\u003c\/li\u003e\u003cli\u003eK418 alloy turbine wheel, heat resistant up to 900 °C\u003c\/li\u003e\u003cli\u003eLightweight ZL104 aluminium compressor housing with cast aluminium compressor wheel\u003c\/li\u003e\u003cli\u003eIncreases engine power and torque\u003c\/li\u003e\u003cli\u003eGaskets included for easy installation\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eCheck fitment\u003c\/h3\u003e\u003cp\u003eBefore ordering, always check the original OEM part number, year of manufacture, engine code and version of your vehicle, as there may be differences between versions. Not sure whether this part fits your vehicle? Feel free to contact us before purchasing.\u003c\/p\u003e","brand":"maxpeedingrods","offers":[{"title":"Default Title","offer_id":50327038230874,"sku":"GGTT3-VL-Z3","price":144.28,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0594\/6379\/4869\/files\/ggtt3-vl-z3_1.jpg?v=1782908869"},{"product_id":"t3-t04e-turbo-oil-return-feed-line-turbocharger-oil-inlet-outlet-drains-kit","title":"T3 T04E Turbo Oil Return FEED Line Turbocharger OIL Inlet Outlet Drain Kit","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eT3 TO4E Turbocharger (.63 A\/R) with oil return and oil feed line kit, universally suitable for 1.5 to 2.5 L (4\/6 cylinder) engines.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eOil return line length:\u003c\/strong\u003e 550 mm\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eOil return line inner diameter:\u003c\/strong\u003e 21 mm\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eOil feed line length:\u003c\/strong\u003e 1000 mm\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eOil feed line inner diameter:\u003c\/strong\u003e 14 mm\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eTurbocharger type:\u003c\/strong\u003e T3\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eExhaust manifold flange:\u003c\/strong\u003e T3 4-bolt flange\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eExhaust outlet flange:\u003c\/strong\u003e V-band flange\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eCooling:\u003c\/strong\u003e Oil-cooled\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eWastegate:\u003c\/strong\u003e Internal wastegate\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003ePower:\u003c\/strong\u003e up to 420 PS\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eCompressor wheel:\u003c\/strong\u003e trim 48.1, air intake diameter 50.5 mm, air outlet diameter 76 mm, A\/R 0.5\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eTurbine wheel:\u003c\/strong\u003e trim 74.2, air intake diameter 65.5 mm, air outlet diameter 55.9 mm, A\/R 0.63\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eApplication:\u003c\/strong\u003e universal turbocharger for 1.5-2.5L 4\/6-cylinder engines\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eCondition:\u003c\/strong\u003e 100% brand new\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eBearing type:\u003c\/strong\u003e Journal bearing\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eAccessories:\u003c\/strong\u003e As pictured\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eImportant: this is an aftermarket and universal turbocharger; modifications may be necessary depending on the application\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eCheck Fitment\u003c\/h3\u003e\u003cp\u003eBefore ordering, always check the original OEM part number, year of manufacture, engine code, and the version of your vehicle, as there may be differences per version. Are you unsure if this part fits your vehicle? Feel free to contact us before purchasing.\u003c\/p\u003e","brand":"maxpeedingrods","offers":[{"title":"Default Title","offer_id":53173695578458,"sku":"BF-GGTT3-Z3_OFLORL-LC-V2","price":189.74,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0594\/6379\/4869\/files\/bf-ggtt3-z3_oflorl-lc-v2_1_78a9aa31-4500-4273-8638-b7d50117ecc9.jpg?v=1782903726"},{"product_id":"billet-turbo-compatible-for-charger-compatible-for-nissan-safari-compatible-for","title":"Billet Turbo T3 T04E suitable for Audi VW 1.8T VR6 .63 AR V Band universal Turbo","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eUniversal billet turbocharger T3 T04E (.63 A\/R, V-band), suitable for 4- or 6-cylinder engines from 1.5 to 2.5 liters, including Audi\/VW 1.8T and VR6.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eExhaust Flange (manifold):\u003c\/strong\u003e T3, 4-bolt flange\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eOutlet Flange:\u003c\/strong\u003e V-band flange (ID\/OD: 2.5\"\/3.1\")\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eCompressor Wheel Trim:\u003c\/strong\u003e 48.1\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eCompressor Wheel Inducer\/Exducer Diameter:\u003c\/strong\u003e 52.7 mm \/ 76 mm\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eCompressor Wheel A\/R:\u003c\/strong\u003e 0.5\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eCompressor Outlet and Inlet:\u003c\/strong\u003e 78 mm \/ 51.5 mm\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eTurbine Wheel Trim:\u003c\/strong\u003e 74.2\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eTurbine Wheel Inducer\/Exducer Diameter:\u003c\/strong\u003e 64.8 mm \/ 55.8 mm\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eTurbine Wheel A\/R:\u003c\/strong\u003e 0.63\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eTurbine Outlet:\u003c\/strong\u003e 79 mm\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eTurbine Outlet Inlet (L x W):\u003c\/strong\u003e 44.7 mm \/ 85.8 mm\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eCooling Type:\u003c\/strong\u003e Oil-cooled\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eOil Inlet:\u003c\/strong\u003e M12x1.25 \u0026amp; 2xM8x1.25\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eOil Outlet:\u003c\/strong\u003e 2xM8x1.25\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eWastegate:\u003c\/strong\u003e Internal\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003ePower:\u003c\/strong\u003e Up to 420 HP\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eBearing Type:\u003c\/strong\u003e Journal bearing\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003ePressure Plate:\u003c\/strong\u003e 270 degrees\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eTurbo Type:\u003c\/strong\u003e Single\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eCondition:\u003c\/strong\u003e Brand new\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eSilicon-molybdenum turbine housing: heat-resistant, stable, corrosion- and crack-resistant\u003c\/li\u003e\n\n\u003cli\u003eK419 alloy turbine wheel: heat-resistant, efficiently converts exhaust gases into kinetic energy\u003c\/li\u003e\n\n\u003cli\u003eCNC-machined forged billet aluminum compressor wheel: high efficiency, fast response, low consumption\u003c\/li\u003e\n\n\u003cli\u003eHigh-speed oil seal: protects bearings and prevents oil leakage and smoking\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003eCheck Fitment\u003c\/h3\u003e\n\u003cp\u003eAlways check the original OEM part number, year of manufacture, engine code, and vehicle version before ordering, as there may be differences per version. Unsure if this part fits your vehicle? Please feel free to contact us before purchasing.\u003c\/p\u003e","brand":"maxpeedingrods","offers":[{"title":"Default Title","offer_id":53275222081882,"sku":"GGTT3-JD-Z3","price":253.97,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0594\/6379\/4869\/files\/ggtt3-jd-z3_1_1862d764-0c38-469a-ad10-84be54f29293.jpg?v=1782908866"},{"product_id":"cylinder-head-piston-kit-set-geschikt-voor-honda-crf70-xr70-ct70-c70-atc70-trx70-s65-70cc-cpk-ct70-g","title":"Engine Set for Cylinder Pistons 70cc Engine Kit suitable for Honda Atc70 Ct70 Trx70 Crf70","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eCylinder and piston kit (70cc) for various small Honda motorcycles\/quads.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSuitable for:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\n\u003cli\u003eHonda S65\u003c\/li\u003e\n\n\u003cli\u003eHonda TRX70\u003c\/li\u003e\n\n\u003cli\u003eHonda ATC70 1978-1985\u003c\/li\u003e\n\n\u003cli\u003eHonda C70 1980-1983\u003c\/li\u003e\n\n\u003cli\u003eHonda C70 1971-1972\u003c\/li\u003e\n\n\u003cli\u003eHonda CRF70F 2004-2009\u003c\/li\u003e\n\n\u003cli\u003eHonda CRF70F 2011-2012\u003c\/li\u003e\n\n\u003cli\u003eHonda CT70 1969-1994\u003c\/li\u003e\n\n\u003cli\u003eHonda XR70R 1997-2003\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eDisplacement:\u003c\/strong\u003e 70cc \/ 72cm³\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eCylinder outer diameter:\u003c\/strong\u003e 47 mm\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eInner diameter (bore):\u003c\/strong\u003e 39 mm\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eIntake valve:\u003c\/strong\u003e outer diameter 23 mm \/ length 66 mm\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eExhaust valve:\u003c\/strong\u003e outer diameter 20 mm \/ length 66 mm\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e 1 year\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003eScope of delivery\u003c\/h3\u003e\n\u003cp\u003eComplete new cylinder and piston kit in standard size, to replace the existing cylinder block.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eCompletely new and unused\u003c\/li\u003e\n\n\u003cli\u003eReplaces the existing cylinder block, ready for direct installation\u003c\/li\u003e\n\n\u003cli\u003ePlug and play\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003eCheck fitment\u003c\/h3\u003e\n\u003cp\u003eAlways check the original OEM part number, year of manufacture, engine code and the version of your vehicle before ordering, as there may be differences per version. Are you unsure whether this part fits your vehicle? Feel free to contact us before purchasing.\u003c\/p\u003e","brand":"maxpeedingrods","offers":[{"title":"Default Title","offer_id":54339989373274,"sku":"CPK-CT70-GT","price":55.34,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0594\/6379\/4869\/files\/cpk-ct70-gt_1_42ca0488-0cec-466c-a231-ad1118f2090e.jpg?v=1782906330"},{"product_id":"billet-compressor-wheel-t3-t04e-street-turbo-turbo-up-to-400-hp-57-a-r-uitlaat-turbine-universal-ggt","title":"Billet T3 T4 T04E .57 AR Universal Turbo for 1.5L - 2.5LOil-cooled","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eUniversal T3 T4 T04E .57 AR billet turbocharger, suitable for 1.5L to 2.5L engines (4\/6-cylinder), max. 18 PSI (1.2 bar); modification may be required for some vehicles.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eTurbine Inlet Flange:\u003c\/strong\u003e T3 T4 4-Bolt Flange Pattern\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eTurbine Outlet Flange:\u003c\/strong\u003e T3 Standard 5-Bolt Flange\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eWastegate:\u003c\/strong\u003e External Wastegate\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eCompressor Trim:\u003c\/strong\u003e 48.1\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eCompressor A\/R:\u003c\/strong\u003e 0.5\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eCompressor Inducer:\u003c\/strong\u003e 52.7 mm\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eCompressor Exducer:\u003c\/strong\u003e 76 mm\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eTurbine Trim:\u003c\/strong\u003e 74.2\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eTurbine A\/R:\u003c\/strong\u003e 0.57\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eTurbine Inducer:\u003c\/strong\u003e 64.8 mm\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eTurbine Exducer:\u003c\/strong\u003e 55.8 mm\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eTurbine Exhaust Inlet:\u003c\/strong\u003e 45 mm\/87 mm\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eCompressor Outlet:\u003c\/strong\u003e 42 mm (inner diameter), 52 mm (outer diameter)\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eCompressor Inlet:\u003c\/strong\u003e 68 mm (inner diameter), 77 mm (outer diameter)\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eOil Inlet:\u003c\/strong\u003e M12*1.25\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eOil Outlet:\u003c\/strong\u003e 2*M8*1.25\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eCooling Type:\u003c\/strong\u003e Oil-cooled\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eBearing Type:\u003c\/strong\u003e Floating Bearing\/Journal Bearing, 270 degrees\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eHorsepower:\u003c\/strong\u003e up to 400 HP\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Matte\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eCondition:\u003c\/strong\u003e Brand New\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eProduct Dimensions:\u003c\/strong\u003e 23 x 22 x 18 cm\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eSilicon-molybdenum turbine housing: heat-resistant, stable and tough, corrosion and crack resistant\u003c\/li\u003e\n\n\u003cli\u003eK419 alloy turbine wheel: heat-resistant, efficiently converts exhaust gas into kinetic energy\u003c\/li\u003e\n\n\u003cli\u003eCNC-machined forged aluminum billet compressor wheel: high efficiency, fast response, low fuel consumption\u003c\/li\u003e\n\n\u003cli\u003eHigh-speed steel oil seal: wear and heat resistant, protects bearings, prevents oil leakage and smoke\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003eCheck Fitment\u003c\/h3\u003e\n\u003cp\u003eAlways check the original OEM part number, year of manufacture, engine code and trim level of your vehicle before ordering, as differences may exist per trim level. If you are unsure whether this part fits your vehicle, please feel free to contact us before purchasing.\u003c\/p\u003e","brand":"maxpeedingrods","offers":[{"title":"Default Title","offer_id":54340851335514,"sku":"GGT04E57-JD-Z3","price":244.09,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0594\/6379\/4869\/files\/ggt04e57-jd-z3_1.jpg?v=1782908646"},{"product_id":"universal-t3-t4-t04e-turbo-turbo-57-a-r-oil-cooledturbine-5-bolts-flange-voor-1-5l-to-2-5l-400hp-ggt","title":"Turbo T3 T4 T04E Turbo 0.57A\/R suitable for Ford Audi VW Seat Turbo","description":"\u003ch3\u003eProduct description\u003c\/h3\u003e\u003cp\u003eThis is a universal T3 T4 T04E oil-cooled turbocharger, suitable for engines from 1.5 to 2.5L.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSuitable for:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eUniversally applicable to any 4-\/6-cylinder engine from 1.5L to 2.5L\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eExhaust flange (manifold):\u003c\/strong\u003e T3 T4, 4-bolt flange pattern\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExhaust flange (downpipe):\u003c\/strong\u003e standard T3, 5-bolt\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCooling:\u003c\/strong\u003e oil-cooled\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWastegate:\u003c\/strong\u003e none (external wastegate required)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompressor trim:\u003c\/strong\u003e 48.1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompressor A\/R:\u003c\/strong\u003e 0.5\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompressor inducer:\u003c\/strong\u003e 52.7 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompressor exducer:\u003c\/strong\u003e 76 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTurbine trim:\u003c\/strong\u003e 74.2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTurbine A\/R:\u003c\/strong\u003e 0.57\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTurbine inducer:\u003c\/strong\u003e 64.8 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTurbine exducer:\u003c\/strong\u003e 55.8 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTurbine exhaust inlet:\u003c\/strong\u003e 45 mm \/ 87 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompressor outlet:\u003c\/strong\u003e 42 mm (inner diameter), 52 mm (outer diameter)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompressor inlet:\u003c\/strong\u003e 68 mm (inner diameter), 77 mm (outer diameter)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower:\u003c\/strong\u003e up to 400+ hp\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCondition:\u003c\/strong\u003e new\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBearing type:\u003c\/strong\u003e journal bearing \/ ball bearing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThrust bearing:\u003c\/strong\u003e 270 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOil inlet:\u003c\/strong\u003e M12x1.25\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOil outlet:\u003c\/strong\u003e 2x M8x1.25\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e 1-year warranty on manufacturing defects\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eTurbine housing made of ductile cast iron QT450-10, heat resistant up to 700°C\u003c\/li\u003e\n\u003cli\u003eTurbine wheel made of K418 alloy, high oxidation stability and resistant to 900°C\u003c\/li\u003e\n\u003cli\u003eCompressor housing made of lightweight ZL104 aluminum\u003c\/li\u003e\n\u003cli\u003eCompressor wheel made of cast aluminum with good sealing and corrosion resistance\u003c\/li\u003e\n\u003cli\u003eIncreases power by approximately 20-40%\u003c\/li\u003e\n\u003cli\u003e100% balance tested with TURBOTECHNICS VSR3\u003c\/li\u003e\n\u003cli\u003eCertified according to TÜV ISO 9001\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003ePlease note\u003c\/h3\u003e\u003cp\u003eThis turbo does not have an internal wastegate; an external wastegate on the manifold is required. Ensure that the oil drain line is lower than the turbo itself and that the exhaust outlet is properly sealed. This is not a vehicle-specific turbo: check specifications and compatibility before ordering. Before installation, always analyze and rectify the cause of any previous turbo defect (e.g., insufficient oil supply or dirt in the intake).\u003c\/p\u003e\u003ch3\u003eCheck fitment\u003c\/h3\u003e\u003cp\u003eBefore ordering, always check the original OEM part number, year of manufacture, engine code, and the specific version of your vehicle, as there may be differences depending on the version. If you are unsure whether this part fits your vehicle, please feel free to contact us before purchase.\u003c\/p\u003e","brand":"maxpeedingrods","offers":[{"title":"Default Title","offer_id":54340851368282,"sku":"GGT04E57-VL","price":122.54,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0594\/6379\/4869\/files\/maxpeedingrods-turbo-ggt04e57-vl-33553463017650.jpg?v=1783027560"},{"product_id":"t3-t4-t04e-turbo-0-5-a-r-0-63-t04e-w-oil-inlet-oilet-feed-return-lines-ggt04e63-vl-oflorl-lc-v2","title":"T3 T4 T04E Turbo 0.5 A\/R 0.63 T04E with oil inlet Linefeed return lines","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eUniversal T3\/T4 turbocharger (T04E) with oil cooling, suitable for use as a replacement turbo on various engines.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSuitable for:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003e1.5L to 2.5L 4 or 6-cylinder engines, up to 400+ hp (universal aftermarket turbo; modifications may be necessary depending on the vehicle)\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003ePower:\u003c\/strong\u003e up to 400 hp boost, maximum 18 PSI\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eCooling:\u003c\/strong\u003e oil-cooled\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eWastegate:\u003c\/strong\u003e external wastegate (no internal wastegate)\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eExhaust side (turbo manifold) flange:\u003c\/strong\u003e T3\/T4, 4-bolt flange pattern\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eExhaust outlet flange:\u003c\/strong\u003e 5-bolt\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eTurbine trim:\u003c\/strong\u003e 74.2\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eTurbine inducer diameter:\u003c\/strong\u003e 64.8 mm\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eTurbine exducer diameter:\u003c\/strong\u003e 55.8 mm\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eTurbine A\/R:\u003c\/strong\u003e 0.63\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eCompressor trim:\u003c\/strong\u003e 48.1\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eCompressor inducer diameter:\u003c\/strong\u003e 52.7 mm\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eCompressor exducer diameter:\u003c\/strong\u003e 76 mm\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eCompressor A\/R:\u003c\/strong\u003e 0.5\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eCompressor outlet:\u003c\/strong\u003e 45 mm (inner diameter), 53 mm (outer diameter)\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eCompressor inlet:\u003c\/strong\u003e 68 mm (inner diameter), 72 mm (outer diameter)\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eBearing:\u003c\/strong\u003e wet float bearing\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e 1-year warranty under normal use\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\n\u003cli\u003eHigh-quality material, cast housing with durable steel\u003c\/li\u003e\n\n\u003cli\u003eSignificantly increases engine power\u003c\/li\u003e\n\n\u003cli\u003eIncreases engine power and torque\u003c\/li\u003e\n\n\u003cli\u003eMaintains combustion chamber pressure and fuel\/air ratio\u003c\/li\u003e\n\n\u003cli\u003eBuilt for durability and strength\u003c\/li\u003e\n\n\u003cli\u003e100% balancing test with VSR machine technology\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003ch3\u003eCheck Fitment\u003c\/h3\u003e\u003cp\u003eBefore ordering, always check the original OEM part number, year of manufacture, engine code, and trim level of your vehicle, as there may be differences depending on the trim. Unsure if this part fits your vehicle? Feel free to contact us before purchase.\u003c\/p\u003e","brand":"maxpeedingrods","offers":[{"title":"Default Title","offer_id":54340851466586,"sku":"GGT04E63-VL_OFLORL-LC-V2","price":196.0,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0594\/6379\/4869\/files\/ggt04e63-vl_oflorl-lc-v2_1_b52e30ca-c036-44cf-b7e2-bbc1e18f00c1.jpg?v=1782908660"},{"product_id":"voor-gt25-t25-voor-gt2860-gt2871-billet-turbo-voor-1-5l-2-0l-350bhp-ball-bearing-ggt2860-sd-v3","title":"T25 T28 Turbo for GT25 GT28 GT2871 GT2860 Racing Turbo 250-480BHP","description":"\u003ch3\u003eProduct description\u003c\/h3\u003e\u003cp\u003eThis T25\/T28 racing turbocharger (GT25, GT28, GT2871, GT2860) is universally applicable for 4-cylinder engines from 1.5 to 2.0 liters and increases power to well over 350 hp.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eExhaust Inlet Flange:\u003c\/strong\u003e T25 Flange\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eExhaust Outlet Flange:\u003c\/strong\u003e 5-Bolt\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eTurbine Side - Turbine Trim:\u003c\/strong\u003e 78.9\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eTurbine Inducer Diameter:\u003c\/strong\u003e 52.8 mm\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eTurbine Exducer Diameter:\u003c\/strong\u003e 46.9 mm\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eTurbine A\/R:\u003c\/strong\u003e 0.64\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eCompressor Side - Compressor Trim:\u003c\/strong\u003e 42.4\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eCompressor Inducer Diameter:\u003c\/strong\u003e 45.6 mm\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eCompressor Exducer Diameter:\u003c\/strong\u003e 70 mm\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eCompressor A\/R:\u003c\/strong\u003e 0.6\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eOil Inlet:\u003c\/strong\u003e M12*1.25\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eOil Outlet:\u003c\/strong\u003e M14 \u0026amp; 2x M8x1.25\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eWater:\u003c\/strong\u003e M14*1.5\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eCooling:\u003c\/strong\u003e Water \u0026amp; Oil Cooled\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eWastegate:\u003c\/strong\u003e Internal Wastegate\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eBearing Type:\u003c\/strong\u003e Dual Ceramic Ball Bearing\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eHorsepower:\u003c\/strong\u003e 350 HP\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eActuator Type:\u003c\/strong\u003e Vacuum\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eTurbo Type:\u003c\/strong\u003e Single\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eUniversal Fit:\u003c\/strong\u003e Yes\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Matte\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eCondition:\u003c\/strong\u003e 100% New\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003ch3\u003eScope of delivery\u003c\/h3\u003e\u003cp\u003e1x Turbocharger, 1x Flange Gasket, 2x Oil Feed\/Drain Gaskets, 1x Bolt, 1x Oil Restrictor, 1x Manual, 1x Brochure, 1x Sticker\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\n\u003cli\u003eStainless steel turbine housing, resistant to temperatures up to 1020 °C\u003c\/li\u003e\n\n\u003cli\u003eK419 alloy steel turbine wheel, high oxidation stability and resistant to temperatures up to 1000 °C\u003c\/li\u003e\n\n\u003cli\u003eCompressor housing made of lightweight ZL104 aluminum\u003c\/li\u003e\n\n\u003cli\u003eCNC machined billet compressor wheel made of forged aluminum for a wider power range and faster response\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003ch3\u003eCheck fitment\u003c\/h3\u003e\u003cp\u003eAlways check the original OEM part number, year of manufacture, engine code and the version of your vehicle before ordering, as differences may exist per version. Are you unsure whether this part fits your vehicle? Please feel free to contact us before purchasing.\u003c\/p\u003e","brand":"maxpeedingrods","offers":[{"title":"Default Title","offer_id":54340852613466,"sku":"GGT2860-SD-V3","price":611.55,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0594\/6379\/4869\/files\/ggt2860-nsd_1_7b0de508-faa6-40c1-b4cf-79235edf2e8e.jpg?v=1782908712"},{"product_id":"street-turbo-t25-t28-voor-gt25-gt28-gt2871-2-0bar-up-to-350bhp-voor-1-6l-2-0l-ggt2871-npjd","title":"For GT2871 T25 T28 for GT25 GT28 GT2860 Water and Oil Cooled Turbo","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eUniversal T25\/T28 billet turbocharger (GT2871-type) for street and light track use, suitable for 1.5L-2.0L 4-cylinder engines with T25 exhaust flange.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eExhaust inlet flange:\u003c\/strong\u003e Standard T25 flange\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eExhaust outlet flange:\u003c\/strong\u003e 5-bolt\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eTurbine trim:\u003c\/strong\u003e 76.3\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eTurbine A\/R:\u003c\/strong\u003e 0.64\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eTurbine inducer diameter:\u003c\/strong\u003e 53.8 mm\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eTurbine exducer diameter:\u003c\/strong\u003e 47 mm\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eCompressor trim:\u003c\/strong\u003e 48\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eCompressor A\/R:\u003c\/strong\u003e 0.60\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eCompressor inducer diameter:\u003c\/strong\u003e 49.2 mm\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eCompressor exducer diameter:\u003c\/strong\u003e 71 mm\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eBearing type:\u003c\/strong\u003e Wet float\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eCooling:\u003c\/strong\u003e Water and oil cooled\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eWastegate:\u003c\/strong\u003e Internal wastegate\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eOil restrictor:\u003c\/strong\u003e Yes, inner diameter 2 mm\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eOil inlet:\u003c\/strong\u003e M12x1.25\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eOil outlet:\u003c\/strong\u003e M14 \u0026amp; 2x M8x1.25\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eWater line:\u003c\/strong\u003e M14x1.5\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003ePower:\u003c\/strong\u003e Boost up to 350 hp\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eType:\u003c\/strong\u003e Individual turbo\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eCondition:\u003c\/strong\u003e 100% brand new\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003ch3\u003eScope of delivery\u003c\/h3\u003e\u003cp\u003e1x turbocharger, 1x flange gasket, 2x oil\/water port gaskets, 1x bolt, 1x oil restrictor, 1x manual, 1x brochure, 1x sticker.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\n\u003cli\u003eTurbine housing made of silicon-molybdenum alloy, heat-resistant up to 850°C\u003c\/li\u003e\n\n\u003cli\u003eSteel turbine wheel made of K419 alloy, resistant to high temperatures up to 1000°C\u003c\/li\u003e\n\n\u003cli\u003eCompressor housing made of ZL104 aluminum, lightweight\u003c\/li\u003e\n\n\u003cli\u003eBillet compressor wheel, CNC-machined aluminum for higher power range and faster boost response\u003c\/li\u003e\n\n\u003cli\u003e20-40% power increase\u003c\/li\u003e\n\n\u003cli\u003eHigh-speed oil seal and precision fit\u003c\/li\u003e\n\n\u003cli\u003e100% balancing test according to TURBOTECHNICS VSR3\u003c\/li\u003e\n\n\u003cli\u003eVNT turbo test G3-min-Flow\u003c\/li\u003e\n\n\u003cli\u003eAdvanced actuator tester\/programmer\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003ch3\u003ePlease note\u003c\/h3\u003e\u003cp\u003eReplace, repair or connect the air filter element according to factory instructions to prevent damage to the compressor wheel. Ensure the oil drain line is lower than the turbo itself. For gasoline engines, a water cooling system must be installed to prevent overheating. Ensure the exhaust port is properly sealed by welding. The degree of adaptation of this universal turbo depends on your specific vehicle; professional installation is strongly recommended. This turbo is not vehicle-specific; please check specifications and compatibility yourself. Analyze and remedy the cause of previous turbo failure before installation.\u003c\/p\u003e\u003ch3\u003eCheck fitment\u003c\/h3\u003e\u003cp\u003eBefore ordering, always check the original OEM part number, year of manufacture, engine code and the version of your vehicle, as there may be differences per version. Are you unsure whether this part fits your vehicle? Please feel free to contact us before purchasing.\u003c\/p\u003e","brand":"maxpeedingrods","offers":[{"title":"Default Title","offer_id":54340852679002,"sku":"GGT2871-NPJD","price":259.91,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0594\/6379\/4869\/files\/maxpeedingrods-turbo-ggt2871-jd-z2-35096864489669.jpg?v=1783284554"},{"product_id":"voor-gt35-gt3582-turbo-geschikt-voor-charger-t3-ar-70-63-universal-anti-surge-compressor-turbo-ggt35","title":"Turbocharger for GT35 GT3582 Turbo for 3.0L-6.0L engine A\/R: 0.63 0.7 Turbo","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eUniversal GT35 GT3582 turbocharger for 3.0L-6.0L engines, capable of significantly increasing engine power.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSuitable for:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eUniversally suitable for 2.5L-6.0L engines, 4- and 6-cylinder (modification may be required for some vehicles)\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eCan increase power up to 600 hp.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eExhaust (turbo manifold) flange:\u003c\/strong\u003e standard T3 flange\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eExhaust outlet flange:\u003c\/strong\u003e 4 bolts\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eTurbine trim:\u003c\/strong\u003e 84.2\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eTurbine A\/R:\u003c\/strong\u003e 0.63\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eTurbine inducer diameter:\u003c\/strong\u003e 68 mm\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eTurbine exducer diameter:\u003c\/strong\u003e 62.4 mm\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eCompressor trim:\u003c\/strong\u003e 56.9\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eCompressor A\/R:\u003c\/strong\u003e 0.7\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eCompressor inducer diameter:\u003c\/strong\u003e 61.5 mm\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eCompressor exducer diameter:\u003c\/strong\u003e 81.5 mm\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eBearing type:\u003c\/strong\u003e wet float bearing\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eCompressor inlet diameter (air intake):\u003c\/strong\u003e 4 inch (103.5 mm)\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eCompressor outlet diameter:\u003c\/strong\u003e 2.5 inch (63.6 mm)\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eWastegate:\u003c\/strong\u003e external wastegate\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eOil feed\/inlet:\u003c\/strong\u003e M10*7\/16-24\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eOil drain\/outlet:\u003c\/strong\u003e M14.1 \u0026amp; 2xM8*1.25\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eWater inlet\/outlet:\u003c\/strong\u003e M14*1.5\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eMaximum pressure:\u003c\/strong\u003e 22 PSI\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eCooling:\u003c\/strong\u003e water + oil\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eThrust bearing:\u003c\/strong\u003e 270 degrees\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e 1 year warranty on manufacturing defects\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\n\u003cli\u003eTurbine housing made of QT450-10 ductile cast iron, heat resistant up to 700℃\u003c\/li\u003e\n\n\u003cli\u003eTurbine wheel made of K418 alloy, high oxidation stability at temperatures up to 900℃\u003c\/li\u003e\n\n\u003cli\u003eCompressor impeller made of cast aluminum alloy with good airtightness and corrosion resistance\u003c\/li\u003e\n\n\u003cli\u003ePower increase up to 450 hp\u003c\/li\u003e\n\n\u003cli\u003e100% balance test with VSR machine technology\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e insufficient oil causes play and damage to the turbo shaft; check oil pressure and ensure complete lubrication. An air filter is necessary to protect the turbo and engine. Before purchasing, check if there is sufficient space in your car for this turbo. This is a universal turbo, modification may be required for some vehicles. Professional installation is strongly recommended (no instructions included).\u003c\/p\u003e\u003ch3\u003eCheck fitment\u003c\/h3\u003e\u003cp\u003eBefore ordering, always check the original OEM part number, year of manufacture, engine code and the version of your vehicle, as there may be differences per version. Are you unsure whether this part fits your vehicle? Feel free to contact us before purchasing.\u003c\/p\u003e","brand":"maxpeedingrods","offers":[{"title":"Default Title","offer_id":54340853596506,"sku":"GGT3582-VL-Z3","price":156.7,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0594\/6379\/4869\/files\/ggt3582-vl-z3_15.jpg?v=1782908762"},{"product_id":"gen2-universal-a-r-0-7-turbo-600hp-voor-4-6-cylinder-2-5l-6-0l-engines-ggt3582gen2-vl","title":"Universal turbo GT3582 GT35 anti-surge T3 flange V-band A\/R 0.63\/0.70 up to 600 hp for 4\/6-cylinder 2.5L-6.0L","description":"\u003ch3\u003eProduct description\u003c\/h3\u003e\u003cp\u003eUniversal GT3582 (GT35, GT3581 type) turbocharger with anti-surge compressor housing, standard T3 inlet flange, V-band outlet and CNC-machined compressor wheel. Water and oil cooled, without wastegate, for 4- and 6-cylinder engines from 2.5L to 6.0L and up to approx. 600 hp. This is not a vehicle-specific part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFits:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eUniversal: all 4- and 6-cylinder engines from 2.5L to 6.0L, up to approx. 600 hp (check the available installation space)\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eOEM \/ part number:\u003c\/strong\u003e no vehicle-specific OEM number; turbo model GT3582 (GT35)\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eExhaust inlet flange:\u003c\/strong\u003e T3 flange\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eExhaust outlet flange:\u003c\/strong\u003e V-band\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eTurbine:\u003c\/strong\u003e trim 84.2, A\/R 0.63, inducer 68 mm, exducer 62.4 mm\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eCompressor:\u003c\/strong\u003e trim 56.9, A\/R 0.70, inducer 61.5 mm, exducer 81.5 mm\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eCompressor inlet \/ outlet:\u003c\/strong\u003e 4 inch (103.5 mm) \/ 2.5 inch (63.6 mm)\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eBearing type:\u003c\/strong\u003e wet floating journal bearing, 270 degree thrust bearing\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eCooling:\u003c\/strong\u003e water and oil cooled\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003ePower:\u003c\/strong\u003e up to approx. 600 hp\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eMaximum boost:\u003c\/strong\u003e 22 PSI\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eWastegate:\u003c\/strong\u003e without wastegate\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eOil feed:\u003c\/strong\u003e M10 x 7\/16-24\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eOil drain:\u003c\/strong\u003e 2x M8 x 1.25\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eWater inlet\/outlet:\u003c\/strong\u003e M14 x 1.5\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eTurbo type:\u003c\/strong\u003e single, matte finish\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eDimensions \/ weight:\u003c\/strong\u003e 32 x 27 x 23 cm, 8.7 kg\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eQuantity:\u003c\/strong\u003e 1x turbocharger, 2x flange gasket, 2x oil feed\/drain gasket, 1x V-band adapter ring with clamp, 1x manual, 1x brochure, 1x sticker\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eCondition:\u003c\/strong\u003e New\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eWarranty:\u003c\/strong\u003e 1 year on manufacturing defects\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eAnti-surge compressor housing for improved air intake\u003c\/li\u003e\u003cli\u003eCompressor wheel of forged, CNC-machined aluminium for high efficiency and fast response\u003c\/li\u003e\u003cli\u003eTurbine housing of ductile cast iron QT450-10 (up to 700 °C) and turbine wheel of K418 alloy (up to 900 °C)\u003c\/li\u003e\u003cli\u003eCompressor housing of lightweight ZL104 aluminium\u003c\/li\u003e\u003cli\u003eV-band turbine outlet for easy installation\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eCheck fitment\u003c\/h3\u003e\u003cp\u003eBefore ordering, always check the original OEM part number, year of manufacture, engine code and version of your vehicle, as there may be differences between versions. Not sure whether this part fits your vehicle? Feel free to contact us before purchasing.\u003c\/p\u003e","brand":"maxpeedingrods","offers":[{"title":"Default Title","offer_id":54340853793114,"sku":"GGT3582GEN2-VL","price":157.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0594\/6379\/4869\/files\/ggt3582gen2-nvl_1_a44109a9-26aa-4fc3-a150-f518cdef0e6e.jpg?v=1782908766"},{"product_id":"t3-t04e-v-band-turbo-turbo-0-63-ar-oil-drain-return-feed-line-kit-ggtt3-vl-z3-oflorl-lc-v2","title":"Turbo T3 T04E 0.63 A\/R met olietoevoer- en retourleidingset","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eT3 TO4E turbocharger (.63 A\/R) with oil return and oil feed lines, a universal turbocharger for 1.5-2.5L 4\/6-cylinder engines.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eOil return line:\u003c\/strong\u003e length 550 mm, inner diameter 21 mm\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eOil feed line:\u003c\/strong\u003e length 1000 mm, inner diameter 14 mm\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eTurbocharger:\u003c\/strong\u003e T3\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eExhaust manifold flange:\u003c\/strong\u003e T3 4-bolt flange\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eExhaust flange:\u003c\/strong\u003e V-band flange\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eCooling:\u003c\/strong\u003e oil-cooled\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eWastegate:\u003c\/strong\u003e internal\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003ePower:\u003c\/strong\u003e up to 420 hp\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eCompressor wheel:\u003c\/strong\u003e trim 48.1, air intake diameter 50.5 mm, air outlet diameter 76 mm, A\/R 0.5\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eTurbine wheel:\u003c\/strong\u003e trim 74.2, air intake diameter 65.5 mm, air outlet diameter 55.9 mm, A\/R 0.63\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eBearing type:\u003c\/strong\u003e journal bearing\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eCondition:\u003c\/strong\u003e 100% brand new\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eAccessories:\u003c\/strong\u003e as shown in the picture\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003ch3\u003ePlease note\u003c\/h3\u003e\u003cp\u003eThis is an aftermarket and universal turbocharger; modification may be required per vehicle. Please check the turbo number before purchase to avoid incorrect purchase.\u003c\/p\u003e\u003ch3\u003eCheck fitment\u003c\/h3\u003e\u003cp\u003eBefore ordering, always check the original OEM part number, year of manufacture, engine code, and the version of your vehicle, as differences may exist per version. If you are unsure whether this part fits your vehicle? Please feel free to contact us before purchase.\u003c\/p\u003e","brand":"maxpeedingrods","offers":[{"title":"Default Title","offer_id":54340855529818,"sku":"GGTT3-VL-Z3_OFLORL-LC-V2","price":193.28,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0594\/6379\/4869\/files\/ggtt3-vl-z3_oflorl-lc-v2_1_f0ca8c3f-619e-499a-a071-186b618af094.jpg?v=1782908872"},{"product_id":"t3-t04e-gen2-turbo-63-a-r-48-1-trim-v-band-flange-voor-4-6-cyl-1-5-2-5l-ggtt3gen2-vl","title":"Universal turbo T04E T3 V-band A\/R 0.63 trim 48.1 internal wastegate 420+ hp Stage 3 for 4\/6-cylinder 1.5L-2.5L","description":"\u003ch3\u003eProduct description\u003c\/h3\u003e\u003cp\u003eUniversal T3 \/ T04E upgrade turbocharger (Stage 3) with T3 inlet flange, V-band outlet flange, internal wastegate and CNC-machined billet compressor wheel. Oil cooled, for 4- and 6-cylinder engines from 1.5L to 2.5L and 420 hp or more. This is not a vehicle-specific part; keep actuator pressure below 25 psi and oil pressure below 2 bar.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFits:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eUniversal: all 4- and 6-cylinder engines from 1.5L to 2.5L (check the available installation space)\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eOEM \/ part number:\u003c\/strong\u003e no vehicle-specific OEM number; turbo model T3 \/ T04E\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eExhaust inlet flange:\u003c\/strong\u003e T3, 4-bolt\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eExhaust outlet flange:\u003c\/strong\u003e V-band (inner\/outer diameter 2.5\/3.1 inch)\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eTurbine:\u003c\/strong\u003e trim 74.2, A\/R 0.63, inducer 64.8 mm, exducer 55.8 mm, outlet 79 mm, inlet 44.7 mm (long) \/ 85.8 mm (wide)\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eCompressor:\u003c\/strong\u003e trim 48.1, A\/R 0.5, inducer 52.7 mm, exducer 76 mm, outlet 78 mm, inlet 51.5 mm\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eOil inlet:\u003c\/strong\u003e M12 x 1.25 and 2x M8 x 1.25\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eOil outlet:\u003c\/strong\u003e 2x M8 x 1.25\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eBearing type:\u003c\/strong\u003e journal bearing, 270 degree thrust bearing\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eCooling:\u003c\/strong\u003e oil cooled\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eWastegate:\u003c\/strong\u003e internal wastegate\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003ePower:\u003c\/strong\u003e 420 hp and more\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eTurbo type \/ finish:\u003c\/strong\u003e single, polished\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003ePackaging:\u003c\/strong\u003e 30 x 28 x 24 cm, 9180 g\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eQuantity:\u003c\/strong\u003e 1x turbocharger, 1x flange gasket, 1x V-band adapter ring with clamp, 2x oil port gasket, 1x bolt, 1x manual, 1x brochure, 1x sticker\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eCondition:\u003c\/strong\u003e New\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eWarranty:\u003c\/strong\u003e 1 year on manufacturing defects\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eCompressor wheel of forged, CNC-machined aluminium for high efficiency and fast response\u003c\/li\u003e\u003cli\u003eTurbine housing of cast iron QT450-10 (up to 700 °C) and turbine wheel of K418 alloy (up to 900 °C)\u003c\/li\u003e\u003cli\u003eCompressor housing of lightweight ZL104 aluminium\u003c\/li\u003e\u003cli\u003eCan increase engine power by approx. 20 to 40%\u003c\/li\u003e\u003cli\u003e100% balance tested with TURBOTECHNICS VSR3\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eCheck fitment\u003c\/h3\u003e\u003cp\u003eBefore ordering, always check the original OEM part number, year of manufacture, engine code and version of your vehicle, as there may be differences between versions. Not sure whether this part fits your vehicle? Feel free to contact us before purchasing.\u003c\/p\u003e","brand":"maxpeedingrods","offers":[{"title":"Default Title","offer_id":54340855595354,"sku":"GGTT3GEN2-VL","price":146.26,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0594\/6379\/4869\/files\/ggtt3gen2-vl_1_6469080c-05a8-4eaa-8b00-dd801b2c137a.jpg?v=1782908881"},{"product_id":"t25-dual-ball-bearing-billet-turbo-0-70-ar-350b-660hp-universal-voor-1-4l-3-0l-gt14303566-sd","title":"T25 Dual Ball Bearing Billet Turbo 0.70 AR 350B-660HP Universal for 1.4L-3.0L","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThis billet twin ceramic ball bearing turbocharger is a universal turbo for 1.4-3.0L engines, up to 660HP.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSuitable for:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\n\u003cli\u003e1.4-3.0L engines up to 660 HP (universal fitment, not vehicle specific)\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eHorsepower:\u003c\/strong\u003e 350HP to 660HP\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eEngine Displacement:\u003c\/strong\u003e 1.4L to 3.0L\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eCompressor Wheel Inducer:\u003c\/strong\u003e 54.4 mm\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eCompressor Wheel Exducer:\u003c\/strong\u003e 67.4 mm\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eCompressor Trim:\u003c\/strong\u003e 65\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eCompressor A\/R:\u003c\/strong\u003e 0.70\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eCompressor Air Inlet:\u003c\/strong\u003e 3 inch\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eCompressor Air Outlet:\u003c\/strong\u003e 2 inch\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eTurbine Wheel Inducer:\u003c\/strong\u003e 53.9 mm\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eTurbine Wheel Exducer:\u003c\/strong\u003e 49.55 mm\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eTurbine Trim:\u003c\/strong\u003e 84\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eTurbine A\/R:\u003c\/strong\u003e 0.49\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eTurbine Inlet:\u003c\/strong\u003e T25 flange\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eTurbine Outlet:\u003c\/strong\u003e 3.55 inch (90 mm) diameter, outside with 81mm V-band centering ring\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eCooling:\u003c\/strong\u003e Water and Oil cooled\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eBearing Type:\u003c\/strong\u003e Twin ceramic ball bearing\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eOil Restrictor:\u003c\/strong\u003e 1 mm\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eOil Inlet:\u003c\/strong\u003e 7\/16-24\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eOil Outlet:\u003c\/strong\u003e Φ13.5-2*M8*1.25\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eWater Thread Size:\u003c\/strong\u003e M14*1.5\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003eScope of delivery\u003c\/h3\u003e\n\u003cp\u003e1x Turbocharger, 2x Oil Gaskets, 1x Flange Gasket, 1x V-band, 1x Manual, 1x Brochure, 1x Sticker.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eStainless steel turbine housing, heat resistant up to 1020°C\u003c\/li\u003e\n\n\u003cli\u003eK419 alloy steel turbine wheel, high oxidation stability, resistant to heat up to 1000°C\u003c\/li\u003e\n\n\u003cli\u003eZL104 aluminum light compressor housing\u003c\/li\u003e\n\n\u003cli\u003eFull CNC machined forged aluminum billet compressor wheel for wider power range and maximum boost response\u003c\/li\u003e\n\n\u003cli\u003eExcellent heat resistance, high efficiency and durability\u003c\/li\u003e\n\n\u003cli\u003eHigh-quality oil seal and precise clearance\u003c\/li\u003e\n\n\u003cli\u003e100% balancing test via TURBOTECHNICS VSR3\u003c\/li\u003e\n\n\u003cli\u003eVNT G3-min-flow turbo test\u003c\/li\u003e\n\n\u003cli\u003eAdvanced actuator tester\/programmer\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003eCheck fitment\u003c\/h3\u003e\n\u003cp\u003eAlways check the original OEM part number, year of manufacture, engine code and the version of your vehicle before ordering, as there may be differences per version. Are you unsure whether this part fits your vehicle? Please feel free to contact us before purchasing.\u003c\/p\u003e","brand":"maxpeedingrods","offers":[{"title":"Default Title","offer_id":54340856086874,"sku":"GT14303566-SD","price":500.58,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0594\/6379\/4869\/files\/gt14303566-sd_1_0780946d-f4da-4f47-8f62-1b2f0a14149e.jpg?v=1782908905"},{"product_id":"racing-billet-ball-bearing-turbo-turbo-v-band-a-r-0-61-0-72-trim-84-65-gt20354777-sd","title":"770HP Ball Bearing V-Band Billet Universal Turbo A\/R 0.72\/ 0.61","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eUniversal billet turbocharger with dual ceramic ball bearings, suitable for engines from 2.0 to 3.5 liters up to 770 hp.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSuitable for:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\n\u003cli\u003eEngines with a displacement of 2.0 to 3.5 liters, up to 770 hp\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eHorsepower:\u003c\/strong\u003e 475 to 770 hp\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eDisplacement:\u003c\/strong\u003e 2.0 to 3.5 L\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eCompressor inducer:\u003c\/strong\u003e 57.6 mm\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eCompressor exducer:\u003c\/strong\u003e 71.3 mm\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eCompressor trim:\u003c\/strong\u003e 65\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eCompressor A\/R:\u003c\/strong\u003e 0.72\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eCompressor air inlet:\u003c\/strong\u003e 4 inch\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eCompressor air outlet:\u003c\/strong\u003e 2 inch\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eTurbine inducer:\u003c\/strong\u003e 60 mm\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eTurbine exducer:\u003c\/strong\u003e 55 mm\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eTurbine trim:\u003c\/strong\u003e 84\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eTurbine A\/R:\u003c\/strong\u003e 0.61\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eTurbine inlet:\u003c\/strong\u003e 3 inch diameter, V-band outer\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eTurbine outlet:\u003c\/strong\u003e 3.55 inch (90 mm) diameter, V-band with 81 mm centering ring\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eCooling:\u003c\/strong\u003e water + oil cooling\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eBearing type:\u003c\/strong\u003e dual ceramic ball bearing\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eOil restrictor:\u003c\/strong\u003e 1 mm\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eOil inlet:\u003c\/strong\u003e 7\/16-24\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eOil outlet:\u003c\/strong\u003e φ13.5-2*M8*1.25\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eWater thread:\u003c\/strong\u003e M14*1.5\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003eScope of delivery\u003c\/h3\u003e\n\u003cp\u003e1x turbocharger, 1x oil seal, 2x V-bands, 1x restrictor, 1x manual, 1x brochure, 1x sticker.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eTurbine housing made of stainless steel, resistant to temperatures up to 1020℃\u003c\/li\u003e\n\n\u003cli\u003eTurbine wheel made of K419 alloy, stable up to 1000℃\u003c\/li\u003e\n\n\u003cli\u003eCompressor housing made of lightweight ZL104 aluminum\u003c\/li\u003e\n\n\u003cli\u003eBillet compressor wheel, fully CNC machined forged aluminum, for a wider power range and faster turbo response\u003c\/li\u003e\n\n\u003cli\u003e100% balance test with TURBOTECHNICS VSR3\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003eCheck fitment\u003c\/h3\u003e\n\u003cp\u003eAlways check the original OEM part number, year of manufacture, engine code and the version of your vehicle before ordering, as differences may exist per version. Are you unsure if this part fits your vehicle? Please feel free to contact us before purchase.\u003c\/p\u003e","brand":"maxpeedingrods","offers":[{"title":"Default Title","offer_id":54340856217946,"sku":"GT20354777-SD","price":610.73,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0594\/6379\/4869\/files\/gt20354777-sd_1_8fc0ae87-3bba-4c7d-a08e-5a6ceb8b180b.jpg?v=1782908912"},{"product_id":"a-r-0-72-voor-gt35-turbo-900hp-billet-compressor-wheel-t4-v-band-2-0-3-5l-engine-gt20355590-sd","title":"GT35 Racing Turbo Dual Ball Bearing 900HP 2.0-3.5L V-Band Water Oil Cooled","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eUniversal turbocharger with dual ceramic ball bearings, water and oil-cooled, with V-band connections. Suitable for engines from 2.0L to 3.5L with power up to 900 hp.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eHorsepower:\u003c\/strong\u003e 550 hp - 900 hp\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eDisplacement:\u003c\/strong\u003e 2.0L - 3.5L\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eCompressor:\u003c\/strong\u003e inducer 61.75 mm | exducer 76.6 mm | trim 65 | A\/R 0.72 | air inlet 4\" | air outlet 2\"\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eTurbine:\u003c\/strong\u003e inducer 60 mm | exducer 54.95 mm | trim 84 | A\/R 0.83 | inlet 3\" V-band | outlet 3.55\" (90 mm) with 81 mm V-band centering ring\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eCooling:\u003c\/strong\u003e Water and oil cooled\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eBearing:\u003c\/strong\u003e Dual ceramic ball bearing\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eOil restrictor:\u003c\/strong\u003e 1 mm\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eOil inlet:\u003c\/strong\u003e 7\/16-24\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eOil outlet:\u003c\/strong\u003e φ13.5 - 2x M8x1.25\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eWater connection:\u003c\/strong\u003e M14x1.5\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003eScope of delivery\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003e1x turbocharger\u003c\/li\u003e\n\n\u003cli\u003e1x oil gasket\u003c\/li\u003e\n\n\u003cli\u003e2x V-bands\u003c\/li\u003e\n\n\u003cli\u003e1x restrictor\u003c\/li\u003e\n\n\u003cli\u003e1x manual\u003c\/li\u003e\n\n\u003cli\u003e1x brochure\u003c\/li\u003e\n\n\u003cli\u003e1x sticker\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eTurbine housing: stainless steel, resistant up to 1020 ℃\u003c\/li\u003e\n\n\u003cli\u003eTurbine wheel: K419 alloy, resistant up to 1000 ℃\u003c\/li\u003e\n\n\u003cli\u003eCompressor housing: lightweight ZL104 aluminum\u003c\/li\u003e\n\n\u003cli\u003eCompressor wheel made from full milled (CNC) forged aluminum for a wider power range\u003c\/li\u003e\n\n\u003cli\u003e100% balanced tested with TURBOTECHNICS VSR3\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003ePlease note\u003c\/h3\u003e\n\u003cp\u003ePetrol engines must install a water cooler to prevent overheating. Ensure the oil return line is lower than the turbo and the exhaust outlet is properly sealed. This turbo is not vehicle-specific; check specifications and compatibility before ordering. Professional installation is highly recommended.\u003c\/p\u003e\n\u003ch3\u003eCheck fitment\u003c\/h3\u003e\n\u003cp\u003eAlways check the original OEM part number, year of manufacture, engine code, and vehicle version before ordering, as there may be differences per version. If you are unsure whether this part fits your vehicle, please feel free to contact us before purchasing.\u003c\/p\u003e\n","brand":"maxpeedingrods","offers":[{"title":"Default Title","offer_id":54340856250714,"sku":"GT20355590-SD","price":610.73,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0594\/6379\/4869\/files\/gt20355590-sd_1_984aaee4-c7e2-4bde-a8be-cd995a1f71c1.jpg?v=1782908913"},{"product_id":"voor-gt45-t4-turbine-66-a-r-com1-05-a-r-v-band-twin-scroll-turbo-turbo-nieuwe-gt45-vl-v3","title":"For GT45 Turbo V-Band Twin-Scroll A\/R .66 A\/R 1.05 98mm up to 600 HP Oil-cooled","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThis GT45 turbocharger with V-band connection and oil cooling is a universal turbo for engines from 4.0L to 6.0L.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSuitable for:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\n\u003cli\u003eUniversal application for all engines from 4.0L to 6.0L; depending on the vehicle, modifications may be necessary\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eExhaust inlet flange:\u003c\/strong\u003e T4 Twin Scroll flange\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eExhaust outlet flange:\u003c\/strong\u003e 3.25\" inlet flange, 4.25\" V-band clamp\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eBearing type:\u003c\/strong\u003e Wet journal bearing\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eCooling type:\u003c\/strong\u003e Oil-cooled\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eOil inlet:\u003c\/strong\u003e M9 and 2*M8*1.25\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eOil outlet:\u003c\/strong\u003e M19 and 2*M8*1.25\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eWastegate:\u003c\/strong\u003e Without wastegate\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003ePower:\u003c\/strong\u003e Up to 600+ HP\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eTurbo type:\u003c\/strong\u003e Individual\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eUniversal fitting:\u003c\/strong\u003e Yes\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Matte\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eCondition:\u003c\/strong\u003e Brand new\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003ePackaging dimensions:\u003c\/strong\u003e 30 x 30 x 27 cm\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eCompressor wheel trim:\u003c\/strong\u003e 49.6\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eCompressor inducer diameter:\u003c\/strong\u003e 69mm\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eCompressor exducer diameter:\u003c\/strong\u003e 98mm\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eCompressor air inlet dimension:\u003c\/strong\u003e 107mm\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eCompressor air outlet dimension:\u003c\/strong\u003e 86.3mm\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eCompressor A\/R:\u003c\/strong\u003e 0.66\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eTurbine wheel trim:\u003c\/strong\u003e 77.6\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eTurbine inducer diameter:\u003c\/strong\u003e 88mm\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eTurbine exducer diameter:\u003c\/strong\u003e 77.5mm\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eTurbine A\/R:\u003c\/strong\u003e 1.05\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eHigh-quality material, cast housing with strong steel\u003c\/li\u003e\n\n\u003cli\u003eSignificantly increases engine power\u003c\/li\u003e\n\n\u003cli\u003eIncreases engine power and torque\u003c\/li\u003e\n\n\u003cli\u003eMaintains pressure in the combustion chamber and fuel\/air ratio\u003c\/li\u003e\n\n\u003cli\u003eBuilt with high-quality material for durability and resistance\u003c\/li\u003e\n\n\u003cli\u003eOEM quality and dimensions, with minor adjustments\u003c\/li\u003e\n\n\u003cli\u003eK18 Inconel wheels: the turbine wheels are made of special K418 alloy, with high oxidation resistance and stability up to 900°C\u003c\/li\u003e\n\n\u003cli\u003eDuctile cast iron QT450-10: resistant to temperatures up to 700°C\u003c\/li\u003e\n\n\u003cli\u003eCast aluminum compressor wheel: good sealing and corrosion resistance\u003c\/li\u003e\n\n\u003cli\u003e100% balancing test\u003c\/li\u003e\n\n\u003cli\u003eBalanced with VSR machine technology through complete and highly precise static and dynamic balancing detection for reliability\u003c\/li\u003e\n\n\u003cli\u003eTwin scroll turbine housing optionally available for faster response than with a single exhaust\u003c\/li\u003e\n\n\u003cli\u003e1-year warranty on each turbo component under normal use, unlimited mileage\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003ePlease note\u003c\/h3\u003e\n\u003cp\u003eBrand new. Professional installation is highly recommended (no instructions included). Additional parts are needed for a complete installation; consult a professional turbo installer for details. This turbo does not have an internal wastegate, so you will need an external wastegate on your manifold.\u003c\/p\u003e\n\u003ch3\u003eCheck fitment\u003c\/h3\u003e\n\u003cp\u003eBefore ordering, always check the original OEM part number, year of manufacture, engine code, and the version of your vehicle, as differences may exist per version. Are you unsure if this part fits your vehicle? Please feel free to contact us before purchase.\u003c\/p\u003e","brand":"maxpeedingrods","offers":[{"title":"Default Title","offer_id":54340856381786,"sku":"GT45-VL-V3","price":210.48,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0594\/6379\/4869\/files\/gt45-vl-v3_1_40a566bb-a26a-4d04-8ca2-c60e83098023.jpg?v=1782908924"},{"product_id":"upgrade-racing-turbo-voor-1-4-3-0l-engine-met-dual-ceramic-ball-bearings-gt66072-sd","title":"Universal Turbo for 1.4-3.0L Engine Ceramic Bearing Water+Oil AR 0.70\/0.72 V-band","description":"\u003ch3\u003eProduct description\u003c\/h3\u003e\n\u003cp\u003eBillet turbocharger (up to 660 hp) with dual ceramic ball bearing, oil-cooled and water-cooled, suitable for engines from 1.4L to 3.0L.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSuitable for:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\n\u003cli\u003eEngines from 1.4L to 3.0L, up to 660 hp\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003ePower:\u003c\/strong\u003e 350 hp - 660 hp\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eDisplacement:\u003c\/strong\u003e 1.4L - 3.0L\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eCompressor Wheel:\u003c\/strong\u003e Ind 54.4 mm | Exd 67.4 mm | Trim 65 | A\/R 0.70 | Inlet 3\" | Outlet 2\"\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eTurbine Wheel:\u003c\/strong\u003e Ind 53.9 mm | Exd 49.55 mm | Trim 84 | A\/R 0.72 | Inlet 3\" | Outlet 3.55\" (90 mm) with centering ring 81 mm V-band\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eCooling:\u003c\/strong\u003e Water + Oil\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eBearing:\u003c\/strong\u003e Dual ceramic ball bearing\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eOil Restrictor:\u003c\/strong\u003e 1 mm\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eOil Inlet:\u003c\/strong\u003e 7\/16-24\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eOil Outlet:\u003c\/strong\u003e Ø13.5-2×M8×1.25\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eWater Thread:\u003c\/strong\u003e M14×1.5\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003eScope of delivery\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003e1x turbocharger\u003c\/li\u003e\n\n\u003cli\u003e2x oil gaskets\u003c\/li\u003e\n\n\u003cli\u003e2x V-bands\u003c\/li\u003e\n\n\u003cli\u003e1x manual\u003c\/li\u003e\n\n\u003cli\u003e1x brochure\u003c\/li\u003e\n\n\u003cli\u003e1x sticker\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eStainless steel turbine housing, resistant up to 1020 °C\u003c\/li\u003e\n\n\u003cli\u003eK419 alloy turbine wheel, high oxidation stability up to 1000 °C\u003c\/li\u003e\n\n\u003cli\u003eLightweight ZL104 aluminum compressor housing\u003c\/li\u003e\n\n\u003cli\u003eBillet compressor wheel made of forged, CNC-machined aluminum for a wider speed range and maximum boost response\u003c\/li\u003e\n\n\u003cli\u003e100% balancing test via TURBOTECHNICS VSR3\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003eNote\u003c\/h3\u003e\n\u003cp\u003eReplace or clean the air filter element according to the manufacturer's manual to prevent damage to the compressor wheel. Ensure that the oil return line is lower than the turbo and that the exhaust outlet is properly sealed. Water cooling is required for gasoline cars. This turbo is not vehicle-specific; please check specifications and compatibility before ordering. Professional installation is highly recommended.\u003c\/p\u003e\n\u003ch3\u003eCheck fitment\u003c\/h3\u003e\n\u003cp\u003eAlways check the original OEM part number, year of manufacture, engine code and the version of your vehicle before ordering, as there may be differences per version. If you are unsure whether this part fits your vehicle, please feel free to contact us before purchase.\u003c\/p\u003e\n","brand":"maxpeedingrods","offers":[{"title":"Default Title","offer_id":54340856643930,"sku":"GT66072-SD","price":627.52,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0594\/6379\/4869\/files\/gt66072-sd_1_97a41191-8280-4d93-9344-1468d910d746.jpg?v=1782908942"},{"product_id":"12pc-chrome-star-socket-set-crv-1-4-3-8-1-2-drive-t8-t70-geschikt-voor-case-hit-t8t70-13","title":"Set of 13 CRV Star Sockets 1\/4 3\/8 1\/2 T8-T70 Storage","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003e13-piece Torx socket set made of chrome vanadium (CRV) with 1\/4\", 3\/8\" and 1\/2\" drives.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Chrome Vanadium (CRV)\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eDrive type:\u003c\/strong\u003e Torx (6-point star)\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eDrive sizes:\u003c\/strong\u003e 1\/4\", 3\/8\", 1\/2\"\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eType:\u003c\/strong\u003e Socket set\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003eScope of delivery\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003e1\/4\" drive: T8, T10, T15, T20, T25, T27, T30\u003c\/li\u003e\n\n\u003cli\u003e3\/8\" drive: T40, T45, T50, T55, T60\u003c\/li\u003e\n\n\u003cli\u003e1\/2\" drive: T70\u003c\/li\u003e\n\n\u003cli\u003e1x plastic storage case\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003ePremium CRV for high hardness, less wear, and long service life\u003c\/li\u003e\n\n\u003cli\u003eHigh torque resistance; chrome-plated mirror finish for corrosion resistance\u003c\/li\u003e\n\n\u003cli\u003ePrecision machined tips with chamfered ends\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003eCheck fitment\u003c\/h3\u003e\n\u003cp\u003eAlways check the original OEM part number, year of manufacture, engine code and the version of your vehicle before ordering, as there may be differences per version. Are you unsure whether this part fits your vehicle? Feel free to contact us before purchasing.\u003c\/p\u003e\n","brand":"maxpeedingrods","offers":[{"title":"Default Title","offer_id":54340872110426,"sku":"HIT-T8T70-13","price":22.73,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0594\/6379\/4869\/files\/hit-t8t70-13_1_2098003a-fd15-427c-ac80-b133b8919344.jpg?v=1782909365"},{"product_id":"geschikt-voor-bmw-e36-325-328-e46-e39-m50-m52-6-cylinder-t3-turbo-1992-1999-uitlaat-spruitstuk-links","title":"Manifold suitable for exhaust M50\/ M52 T3 T4 Top Mount Turbo Manifold suitable for BMW E36 E46 92-99 left-hand drive","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThis turbo manifold (T3 T4, top mount) is designed for BMW's six-cylinder M50\/M52 engines and is only suitable for left-hand drive vehicles.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSuitable for:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\n\u003cli\u003eBMW E34, 1990-1992, engine 520i M50B20\u003c\/li\u003e\n\n\u003cli\u003eBMW E34, 1992-1995, engine 520i M50TU B20\u003c\/li\u003e\n\n\u003cli\u003eBMW E34, 1990-1992, engine 525i M50B25\u003c\/li\u003e\n\n\u003cli\u003eBMW E34, 1992-1996, engine 525i M50TU B25\u003c\/li\u003e\n\n\u003cli\u003eBMW E36, 1990-1992, engine 320i M50B20\u003c\/li\u003e\n\n\u003cli\u003eBMW E36, 1994-1999, engine 328i M52B28\u003c\/li\u003e\n\n\u003cli\u003eBMW E36, 1992-1994, engine 320i M50TU B20\u003c\/li\u003e\n\n\u003cli\u003eBMW E36, 1989-1992, engine 325i M50B25\u003c\/li\u003e\n\n\u003cli\u003eBMW E36, 1992-1995, engine 325i M50TU B25\u003c\/li\u003e\n\n\u003cli\u003eBMW E36, 1994-1999, engine 320i M52B20\u003c\/li\u003e\n\n\u003cli\u003eBMW E36, 1994-1999, engine 323i M52B25\u003c\/li\u003e\n\n\u003cli\u003eBMW E36, 1997-2000, engine 323ti M52B25\u003c\/li\u003e\n\n\u003cli\u003eBMW E36\/7 Z3 2.8, 1998-2001, engine M52TUB28\u003c\/li\u003e\n\n\u003cli\u003eBMW E39, 1995-1998, engine 523i M52B25\u003c\/li\u003e\n\n\u003cli\u003eBMW E39, 1996-1999, engine 520i M52B20\u003c\/li\u003e\n\n\u003cli\u003eBMW E39, 1998-2000, engine 520i M52TUB20\u003c\/li\u003e\n\n\u003cli\u003eBMW E39, 1998-2000, engine 523i M52TUB25\u003c\/li\u003e\n\n\u003cli\u003eBMW E39, 1995-1998, engine 528i M52B28\u003c\/li\u003e\n\n\u003cli\u003eBMW E39, 1998-2000, engine 528i M52TUB28\u003c\/li\u003e\n\n\u003cli\u003eBMW E46, 1998-2000, engine 320i\/320Ci M52TUB20\u003c\/li\u003e\n\n\u003cli\u003eBMW E46, 1998-2000, engine 323i\/323Ci M52TUB25\u003c\/li\u003e\n\n\u003cli\u003eBMW E46, 1998-2000, engine 328i\/328Ci M52TUB28\u003c\/li\u003e\n\n\u003cli\u003eBMW Z3, 1998-2000, engine Z3 2.0i M52TUB20\u003c\/li\u003e\n\n\u003cli\u003eBMW Z3, 1997-1999, engine Z3 2.8i M52B28\u003c\/li\u003e\n\n\u003cli\u003eBMW E38, 1998-2001, engine 728i\/728iL M52TUB28\u003c\/li\u003e\n\n\u003cli\u003eBMW E38, 1996-1998, engine 728i\/728iL M52B28\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eFlange size:\u003c\/strong\u003e T3 turbo flange, fits all T3 turbochargers\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eWastegate flange:\u003c\/strong\u003e 35 mm \/ 38 mm\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eConnection flange size:\u003c\/strong\u003e 86 mm x 45 mm\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eCondition:\u003c\/strong\u003e new\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e cast iron turbo manifold\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eApplication:\u003c\/strong\u003e left-hand drive vehicles (LHD) only\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e direct replacement, easy installation. No installation instructions included; if in doubt, consult a professional mechanic.\u003c\/p\u003e\n\u003ch3\u003eCheck fitment\u003c\/h3\u003e\n\u003cp\u003eBefore ordering, always check the original OEM part number, year of manufacture, engine code, and your vehicle's trim level, as differences may exist between trim levels. Are you unsure if this part fits your vehicle? Please feel free to contact us before purchasing.\u003c\/p\u003e","brand":"maxpeedingrods","offers":[{"title":"Default Title","offer_id":54340907860314,"sku":"MF-E36-9299","price":123.53,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0594\/6379\/4869\/files\/mf-e36-9299_4_0cdac898-486e-4e28-ab2d-50267a2cb60b.jpg?v=1782910370"},{"product_id":"43-3-braided-stainless-turbo-charge-1-8-npt-oil-feed-line-fit-t3-t3-t4-t4-t70-ofl-18-4-90-50-gg","title":"43.3 Braided Stainless Turbo Charger 1\/8 NPT Oil Feed Line Fit T3 T3\/T4 T4 T70","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eUniversal stainless steel turbo oil feed line with 4AN hose connection, suitable for various turbo installations.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eOil return line length:\u003c\/strong\u003e 43.3\" (with adapter fitting)\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eHose connection:\u003c\/strong\u003e 90-degree 4AN female to straight 4AN male\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e high-quality steel with aluminum components\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003eScope of delivery\u003c\/h3\u003e\n\u003cp\u003eAs pictured.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eUniversal kit, modification may be required\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003eCheck Fitment\u003c\/h3\u003e\n\u003cp\u003eAlways check the original OEM part number, year of manufacture, engine code, and vehicle version before ordering, as there may be differences depending on the version. Are you unsure whether this part fits your vehicle? Feel free to contact us before purchasing.\u003c\/p\u003e","brand":"maxpeedingrods","offers":[{"title":"Default Title","offer_id":54340928110938,"sku":"OFL-18-4-90-50-GG","price":26.98,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0594\/6379\/4869\/files\/ofl-18-4-90-50-gg_1_121c6d92-da34-4544-8fb0-138062508b63.jpg?v=1782910780"},{"product_id":"turbo-oil-feed-drain-return-line-set-voor-t3-voor-gt30-gt35-gt3582-gt3076-gt3037-nieuwe-ofl-gt35","title":"Turbo Oil Feed + Drain Return Line Kit for T3 for GT30 GT3582 GT3076 GT3037","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eTurbo oil feed\/return line kit, suitable for the Ford Falcon BA\/BF XR6 and FG\/FGX with GT30\/GT35 turbo.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSuitable for:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\n\u003cli\u003eFord Falcon XR6 BA\/BF, FPV F6\u003c\/li\u003e\n\n\u003cli\u003eGT30\/GT35 type turbochargers with T3 flange\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eOil Return Line Length:\u003c\/strong\u003e 550 mm\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eOil Feed Line Length:\u003c\/strong\u003e 1000 mm\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eHose End Connection:\u003c\/strong\u003e 10 AN\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eCondition:\u003c\/strong\u003e 100% Brand New\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e High-quality steel with aluminum parts\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003ch3\u003eScope of delivery\u003c\/h3\u003e\u003cp\u003eComplete kit including gasket, screws etc., exactly as shown in the image.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\n\u003cli\u003eEasy to install and apply\u003c\/li\u003e\n\n\u003cli\u003eComplete kit for oil feed and drain return lines\u003c\/li\u003e\n\n\u003cli\u003eStainless steel braided exhaust hose, resistant to heat and pressure\u003c\/li\u003e\n\n\u003cli\u003eAnodized finish for best cooling performance on the turbo and long service life\u003c\/li\u003e\n\n\u003cli\u003eGasket, screws, washers and fittings made of high-quality aluminum\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003ch3\u003eCheck fitment\u003c\/h3\u003e\u003cp\u003eBefore ordering, always check the original OEM part number, year of manufacture, engine code and the version of your vehicle, as there may be differences per version. Are you unsure whether this part fits your vehicle? Please feel free to contact us before purchase.\u003c\/p\u003e","brand":"maxpeedingrods","offers":[{"title":"Default Title","offer_id":54340935123290,"sku":"OFL-GT35","price":47.43,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0594\/6379\/4869\/files\/ofl-gt35_1.jpg?v=1782910822"},{"product_id":"t3-t4-t70-t66-t04e-turbo-turbo-oil-feed-return-drain-line-fitting-kit-spt-oflorl-lc-v2","title":"AN10 Return Line Hose Oil Line Kit for T3 T4 T70 T66","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThis universal oil kit with oil feed and return lines is intended for T3\/T4, T04E, T3T4, T70 and GT28 turbos.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eOil return line length:\u003c\/strong\u003e 550mm\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eOil return line inner diameter:\u003c\/strong\u003e ø21\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eOil feed line length:\u003c\/strong\u003e 1000mm\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eOil feed line inner diameter:\u003c\/strong\u003e ø14\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eHose connection:\u003c\/strong\u003e 10 AN\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e high-quality steel with aluminum components\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e 1 year warranty on manufacturing defects\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003ch3\u003eScope of delivery\u003c\/h3\u003e\u003cp\u003eComplete oil feed and return line kit, including gasket, screws, and other high-quality aluminum fittings, exactly as shown in the image\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\n\u003cli\u003e100% brand new and easy to install\u003c\/li\u003e\n\n\u003cli\u003eStainless steel braided oil drain hose, resistant to heat and pressure, strong and durable\u003c\/li\u003e\n\n\u003cli\u003eAnodized finish for the best cooling performance of your turbo and a long lifespan\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003ch3\u003ePlease note\u003c\/h3\u003e\u003cp\u003eThis is a universal kit. Not all parts will fit directly onto your car without modifications; some accessories from your original OEM oil kit may still be required. Instructions are not included; professional installation and alignment are recommended.\u003c\/p\u003e\u003ch3\u003eCheck fitment\u003c\/h3\u003e\u003cp\u003eAlways check the original OEM part number, year of manufacture, engine code, and the version of your vehicle before ordering, as there may be differences per version. Are you unsure whether this part fits your vehicle? Please feel free to contact us before purchase.\u003c\/p\u003e","brand":"maxpeedingrods","offers":[{"title":"Default Title","offer_id":54340935188826,"sku":"OFLORL-LC-V2","price":48.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0594\/6379\/4869\/files\/maxpeedingrods-engine-system-ggtt3-oflorl-lc-v2-30279145193650.jpg?v=1783200195"},{"product_id":"turbo-repair-kit-voor-t-series-t3-t4-t04e-t04b-t70-t72-t76-turbo-w-standard-shaft-rk-70789700","title":"Turbo Repair Kit for T-Series T3 T4 T04E T04B T70 T72 T76 Turbo w\/Standard Shaft","description":"\u003ch3\u003eProduct description\u003c\/h3\u003e\u003cp\u003eRepair\/rebuild kit for turbochargers with standard shaft. Suitable for Turbonetics, Precision and other T-series turbos (T3 T4 T04E T04B T70 T72 T76) with standard shaft.\u003c\/p\u003e\u003ch3\u003eScope of delivery\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e1x thrust bearing\u003c\/li\u003e\n\u003cli\u003e1x thrust collar\u003c\/li\u003e\n\u003cli\u003e1x thrust spacer\u003c\/li\u003e\n\u003cli\u003e2x journal bearing\u003c\/li\u003e\n\u003cli\u003e4x bearing C-clip\u003c\/li\u003e\n\u003cli\u003e1x compressor side seal ring\u003c\/li\u003e\n\u003cli\u003e1x step-gap turbine side seal ring\u003c\/li\u003e\n\u003cli\u003e1x lock nut\u003c\/li\u003e\n\u003cli\u003e1x compressor housing O-ring\u003c\/li\u003e\n\u003cli\u003e1x seal plate O-ring\u003c\/li\u003e\n\u003cli\u003e2x gasket\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eStep-gap ring prevents oil leakage\u003c\/li\u003e\n\u003cli\u003eImproved loose thrust spacer and thrust collar\u003c\/li\u003e\n\u003cli\u003e360-degree copper alloy thrust bearing\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003ePlease note\u003c\/h3\u003e\u003cp\u003eNo manual included; professional installation is highly recommended.\u003c\/p\u003e\u003ch3\u003eCheck fitment\u003c\/h3\u003e\u003cp\u003eAlways check the original OEM part number, year of manufacture, engine code and the version of your vehicle before ordering, as there may be differences per version. Are you unsure whether this part fits your vehicle? Please feel free to contact us before purchasing.\u003c\/p\u003e","brand":"maxpeedingrods","offers":[{"title":"Default Title","offer_id":54340950622554,"sku":"RK-70789700","price":32.6,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0594\/6379\/4869\/files\/rk-70789700_1_61cd5fd8-edd2-49b5-875b-6a0190812765.jpg?v=1782911458"},{"product_id":"a-r-0-5-0-57-turbocharger-for-1-6l-2-3l-t3-t4-t04e-turbo-450hp-oil-cooled-ggt04e57-jd-z2","title":"A\/R 0.5 0.57 Turbo for 1.6L-2.3L T3 T4 T04E Turbo 450HP Oil Cooled","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eUniversal turbocharger (T3\/T4 T04E), oil-cooled, suitable for 4- or 6-cylinder engines. Modification may be required for some vehicles.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSuitable for:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eUniversal application: 1.5L to 2.5L, any 4-\/6-cylinder engine (maximum 18 PSI \/ 1.2 bar)\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTurbine inlet flange:\u003c\/strong\u003e T3 T4 4-bolt\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTurbine outlet flange:\u003c\/strong\u003e standard T3 5-bolt\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWastegate:\u003c\/strong\u003e without wastegate\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompressor trim:\u003c\/strong\u003e 48.1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompressor A\/R:\u003c\/strong\u003e 0.5\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompressor inducer\/exducer:\u003c\/strong\u003e 52.7 mm \/ 76 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTurbine trim:\u003c\/strong\u003e 74.2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTurbine A\/R:\u003c\/strong\u003e 0.57\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTurbine inducer\/exducer:\u003c\/strong\u003e 64.8 mm \/ 55.8 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOil inlet:\u003c\/strong\u003e M12*1.25\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOil outlet:\u003c\/strong\u003e 2*M8*1.25\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCooling:\u003c\/strong\u003e oil cooling\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBearing:\u003c\/strong\u003e journal bearing \/ floating bearing, thrust bearing 270 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHorsepower:\u003c\/strong\u003e up to 400+ hp\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCondition:\u003c\/strong\u003e new\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e 23 × 22 × 18 cm\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eSilicon-molybdenum turbine housing: heat-resistant, corrosion and crack-resistant\u003c\/li\u003e\n\u003cli\u003eK419 alloy turbine wheel; CNC-machined billet aluminum compressor wheel\u003c\/li\u003e\n\u003cli\u003eHigh-speed steel oil seal ring, protects the bearings\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003ePlease note\u003c\/h3\u003e\u003cp\u003eThis turbo is not vehicle-specific; please check specifications and compatibility before ordering. Before installation, replace the air filter and engine oil. Ensure the oil return line is lower than the turbo itself. Before assembly, analyze and resolve the cause of the old turbo's defect. Professional installation is strongly recommended.\u003c\/p\u003e\u003ch3\u003eCheck fitment\u003c\/h3\u003e\u003cp\u003eBefore ordering, always check the original OEM part number, year of manufacture, engine code and trim level of your vehicle, as there may be differences per trim level. Are you unsure whether this part fits your vehicle? Please feel free to contact us before purchasing.\u003c\/p\u003e","brand":"maxpeedingrods","offers":[{"title":"Default Title","offer_id":54380568969562,"sku":"GGT04E57-JD-Z2","price":256.34,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0594\/6379\/4869\/files\/ggt04e57-njd_1.jpg?v=1782908645"},{"product_id":"t04e-t3-t4-a-r-57-turbo-compatible-for-ford-1999-turbocharger-400-hp-boost-for-1-5-2-5l-ggt04e57-nvl-oflorl-lc-v2","title":"T04E T3\/T4 A.R .57 Turbo suitable for Ford 1999 Turbo 400+HP BOOST for 1.5-2.5L","description":"\u003ch3\u003eProduct description\u003c\/h3\u003e\u003cp\u003eUniversal turbocharger (T04E, T3\/T4, .57 A\/R, 57 Trim), applicable to various 4- and 6-cylinder engines as used in VW Golf and Audi A4\/A6 1.8T (modifications may be necessary for certain vehicles).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSuitable for:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eUniversal application on 1.5L to 2.5L 4\/6-cylinder engines, maximum 18 PSI (1.2 bar)\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eTurbine inlet flange:\u003c\/strong\u003e T3 T4, 4-bolt flange\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eTurbine outlet flange:\u003c\/strong\u003e T3 standard, 5-bolt flange\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eWastegate:\u003c\/strong\u003e Without wastegate\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eCompressor trim:\u003c\/strong\u003e 48.1\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eCompressor A\/R:\u003c\/strong\u003e 0.5\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eCompressor inducer:\u003c\/strong\u003e 52.7 mm\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eCompressor exducer:\u003c\/strong\u003e 76 mm\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eTurbine trim:\u003c\/strong\u003e 74.2\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eTurbine A\/R:\u003c\/strong\u003e 0.57\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eTurbine inducer:\u003c\/strong\u003e 64.8 mm\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eTurbine exducer:\u003c\/strong\u003e 55.8 mm\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eTurbine exhaust inlet:\u003c\/strong\u003e 45 mm \/ 87 mm\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eCompressor outlet:\u003c\/strong\u003e 42 mm (inner diameter), 52 mm (outer diameter)\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eCompressor inlet:\u003c\/strong\u003e 68 mm (inner diameter), 77 mm (outer diameter)\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eOil inlet:\u003c\/strong\u003e M12*1.25\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eOil outlet:\u003c\/strong\u003e 2*M8*1.25\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eCooling:\u003c\/strong\u003e Oil-cooled\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eBearing type:\u003c\/strong\u003e Floating bearing \/ rolling bearing\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eBearing clearance:\u003c\/strong\u003e 270 degrees\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003ePower:\u003c\/strong\u003e Up to 400 HP\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eTurbo type:\u003c\/strong\u003e Loose\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Matte\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eCondition:\u003c\/strong\u003e Brand new\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eProduct dimensions:\u003c\/strong\u003e 23 x 22 x 18 cm\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eWeight incl. packaging:\u003c\/strong\u003e 7620 g\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\n\u003cli\u003eTurbine housing made of ductile cast iron QT450-10, heat resistant up to 700°C\u003c\/li\u003e\n\n\u003cli\u003eTurbine wheel made of K418 alloy steel, high oxidation stability and resistant to temperatures up to 900°C\u003c\/li\u003e\n\n\u003cli\u003eCompressor housing made of lightweight L104 aluminum\u003c\/li\u003e\n\n\u003cli\u003eCompressor impeller made of cast aluminum, good gas tightness and corrosion resistance\u003c\/li\u003e\n\n\u003cli\u003eCan increase power by 20-40%\u003c\/li\u003e\n\n\u003cli\u003e100% balance tested according to TURBOTECHNICS VSR3\u003c\/li\u003e\n\n\u003cli\u003eProfessional installation strongly recommended; this turbo is not vehicle-specific, please check specifications carefully before ordering\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003ch3\u003eCheck fitment\u003c\/h3\u003e\u003cp\u003eBefore ordering, always check the original OEM part number, year of manufacture, engine code, and the version of your vehicle, as there may be differences per version. If you are unsure whether this part fits your vehicle, please feel free to contact us before purchasing.\u003c\/p\u003e","brand":"maxpeedingrods","offers":[{"title":"Default Title","offer_id":54380569395546,"sku":"GGT04E57-NVL_OFLORL-LC-V2","price":165.03,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0594\/6379\/4869\/files\/ggt04e57-nvl_oflorl-lc-v2_1.jpg?v=1782908648"},{"product_id":"t3-t4-t04e-turbocharger-400ps-57-a-r-universal-4-6-zyl-2-5l-3-5l-upgrade-ggt04e57-vl-z3","title":"T3 T4 T04E Turbocharger 400HP .57 A.R Universal 4\/6 Cyl. 2.5L-3.5L Upgrade","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eUniversal turbocharger for performance enhancement on 4- and 6-cylinder engines.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSuitable for:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eUniversal application (modification may be required for some vehicles), suitable for 1.5L to 2.5L, all 4\/6 cylinder engines, maximum 18 PSI (1.2 bar)\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTurbine Inlet Flange:\u003c\/strong\u003e T3 T4 4-bolt flange pattern\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTurbine Outlet Flange:\u003c\/strong\u003e standard T3 5-bolt flange pattern\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWastegate:\u003c\/strong\u003e without wastegate\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompressor Trim:\u003c\/strong\u003e 48.1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompressor A\/R:\u003c\/strong\u003e 0.5\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompressor Inducer:\u003c\/strong\u003e 52.7 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompressor Exducer:\u003c\/strong\u003e 76 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTurbine Trim:\u003c\/strong\u003e 74.2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTurbine A\/R:\u003c\/strong\u003e 0.57\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTurbine Inducer:\u003c\/strong\u003e 64.8 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTurbine Exducer:\u003c\/strong\u003e 55.8 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTurbine Outlet-Inlet:\u003c\/strong\u003e 45 mm\/87 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompressor Outlet:\u003c\/strong\u003e 42 mm (inner diameter), 52 mm (outer diameter)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompressor Inlet:\u003c\/strong\u003e 68 mm (inner diameter), 77 mm (outer diameter)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOil Inlet:\u003c\/strong\u003e M12*1.25\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOil Outlet:\u003c\/strong\u003e 2*M8*1.25\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCooling Method:\u003c\/strong\u003e oil-cooled\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBearing Type:\u003c\/strong\u003e floating bearing\/journal bearing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThrust Bearing:\u003c\/strong\u003e 270 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHorsepower:\u003c\/strong\u003e up to 400+ hp\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e matte\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCondition:\u003c\/strong\u003e brand new\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eTurbine housing: ductile cast iron QT450-10, heat resistant up to 700°C\u003c\/li\u003e\n\u003cli\u003eSteel turbine wheel: K418 alloy, high oxidation stability and resistance up to 900°C\u003c\/li\u003e\n\u003cli\u003eCompressor housing: aluminum L104, lightweight\u003c\/li\u003e\n\u003cli\u003eCompressor impeller\/blades: cast aluminum, superior airtightness and corrosion resistance\u003c\/li\u003e\n\u003cli\u003eCost-effective turbo increases engine power by 20-40%\u003c\/li\u003e\n\u003cli\u003eHigh-speed oil seal and precision clearance\u003c\/li\u003e\n\u003cli\u003e100% balance tested (TURBOTECHNICS VSR3)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003ePlease note\u003c\/h3\u003e\u003cp\u003eThis is not a vehicle-specific turbo. Please check the specifications and compatibility carefully before ordering. Always analyze and remedy the cause of a previous turbo failure (e.g., insufficient oil lubrication, dirt in the intake section, non-functioning crankcase ventilation) before installation.\u003c\/p\u003e\u003ch3\u003eCheck fitment\u003c\/h3\u003e\u003cp\u003eAlways check the original OEM part number, year of manufacture, engine code, and the version of your vehicle before ordering, as there may be differences per version. If you are unsure whether this part fits your vehicle, please feel free to contact us before purchase.\u003c\/p\u003e","brand":"maxpeedingrods","offers":[{"title":"Default Title","offer_id":54380569493850,"sku":"GGT04E57-VL-Z3","price":122.54,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0594\/6379\/4869\/files\/ggt04e57-vl-z3_1.jpg?v=1782908650"},{"product_id":"s300sx3-turbocharger-66mm-t4-twin-scroll-0-91-a-r-85-47-trim-320-800hp-177275-ggt177275-nvl","title":"Turbo S300SX3 66 mm T4 twin-scroll A\/R 0.91 85\/47 trim 320-800 hp compatible with John Deere 6081H 177275","description":"\u003ch3\u003eProduct description\u003c\/h3\u003e\u003cp\u003eS300SX3 turbocharger (S366) with 66 mm compressor inducer, T4 twin-scroll inlet flange and turbine A\/R 0.91. Developed for John Deere agricultural tractors with the 6081H engine and suitable for universal use from 320 to 800 hp.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFits:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eJohn Deere agricultural tractor with 6081H engine (2001-06)\u003c\/li\u003e\u003cli\u003eVarious John Deere applications\u003c\/li\u003e\u003cli\u003eUniversal application 320-800 hp (modification may be required)\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eOEM \/ part number:\u003c\/strong\u003e 177272, 177275, 177281, 176635, 176647\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eTurbo model:\u003c\/strong\u003e S300SX3, S300G, S300S-084, S300S0102, S300S084, S300-83H33DC-AGM\/0.9176ZD3\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eEngine:\u003c\/strong\u003e John Deere 6081H\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eTurbine:\u003c\/strong\u003e inducer 80 mm (3.14 inch), exducer 73 mm (2.9 inch), trim 85, A\/R 0.91, 10 blades\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eCompressor:\u003c\/strong\u003e inducer 66 mm (2.6 inch), exducer 96 mm (3.8 inch), trim 47, 7+7 blades\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eTurbine inlet flange:\u003c\/strong\u003e T4 twin-scroll\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eTurbine outlet flange:\u003c\/strong\u003e Marmon flange\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eCooling:\u003c\/strong\u003e oil-cooled\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eBearing type:\u003c\/strong\u003e journal bearing, 270-degree thrust bearing\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003ePower:\u003c\/strong\u003e 320-800 hp\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eQuantity:\u003c\/strong\u003e 1x turbocharger\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eCondition:\u003c\/strong\u003e New\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eWarranty:\u003c\/strong\u003e 1 year on manufacturing defects\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eTurbine housing made of QT450-10 ductile cast iron, resistant up to 700 °C\u003c\/li\u003e\u003cli\u003eTurbine wheel made of K418 alloy, oxidation resistant up to 900 °C\u003c\/li\u003e\u003cli\u003eCast aluminium compressor blades with good gas tightness\u003c\/li\u003e\u003cli\u003eOil drain must be lower than the turbo; petrol engines require water cooling\u003c\/li\u003e\u003cli\u003eProfessional installation strongly recommended; no manual included\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eCheck fitment\u003c\/h3\u003e\u003cp\u003eBefore ordering, always check the original OEM part number, year of manufacture, engine code and version of your vehicle, as there may be differences between versions. Not sure whether this part fits your vehicle? Feel free to contact us before purchasing.\u003c\/p\u003e","brand":"maxpeedingrods","offers":[{"title":"Default Title","offer_id":54380571689306,"sku":"GGT177275-NVL","price":299.43,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0594\/6379\/4869\/files\/ggt177275-nvl_1_ac673ba4-81c4-416f-bf78-73d56b94834c.jpg?v=1782908707"},{"product_id":"strada-di-caricabatterie-turbo-universale-for-gt3037-500hp-compatible-for-tutti-i-motori-4-6-cyl-2-5l-3-0l-turbocompressore-con-ruota-del-compressore-in-billet-ggt3037-jd","title":"Universal Turbo Street for GT3037 500HP suitable for all 4\/6 cyl 2.5L-3.0L engines Turbo with billet compressor wheel","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eUniversal turbocharger from the GT3037 series for street and sports use, with billet aluminum compressor wheel.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSuitable for:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eAll 6\/8 cylinder engines, 2.5L-6.0L (universal application, up to 500 hp)\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTurbine trim:\u003c\/strong\u003e 74.2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTurbine inducer diameter:\u003c\/strong\u003e 64.8 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTurbine exducer diameter:\u003c\/strong\u003e 55.8 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTurbine A\/R:\u003c\/strong\u003e 0.82\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompressor trim:\u003c\/strong\u003e 48.1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompressor inducer diameter:\u003c\/strong\u003e 52.7 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompressor exducer diameter:\u003c\/strong\u003e 76 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompressor A\/R:\u003c\/strong\u003e 0.6\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBearing:\u003c\/strong\u003e journal bearing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInternal wastegate:\u003c\/strong\u003e no\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCooling:\u003c\/strong\u003e water + oil\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExhaust flange (downpipe):\u003c\/strong\u003e standard 4-bolt\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInlet flange exhaust side (turbo-manifold):\u003c\/strong\u003e standard T3-flange\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e 1 year\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eStreet turbocharger with higher performance than the original\u003c\/li\u003e\n\u003cli\u003eSilicon-molybdenum turbine housing, heat resistant up to 850 °C\u003c\/li\u003e\n\u003cli\u003eTurbine wheel made of special K419 alloy, stable up to 1000 °C\u003c\/li\u003e\n\u003cli\u003ePrecision-machined aluminum blades for reduced noise and quicker response\u003c\/li\u003e\n\u003cli\u003eBalanced with VSR machine technology\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCheck fitment\u003c\/h3\u003e\u003cp\u003eBefore ordering, always check the original OEM part number, year of manufacture, engine code and the version of your vehicle, as there may be differences per version. Are you unsure whether this part fits your vehicle? Please contact us before purchasing.\u003c\/p\u003e","brand":"maxpeedingrods","offers":[{"title":"Default Title","offer_id":54380571918682,"sku":"GGT3037-JD","price":300.96,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0594\/6379\/4869\/files\/ggt3037-jd_1.jpg?v=1782908724"},{"product_id":"billet-turbocharger-fur-gt3582-turbo-t3-63-a-r-turbine-70-a-r-allle-4-6-zyl-3l-6-0l-ggt3582-jd-z3","title":"Billet turbo GT3582 GT35 anti-surge T3 flange 4-bolt A\/R 0.63\/0.70 water cooled up to 600 hp for 4\/6-cylinder 2.5L-6.0L","description":"\u003ch3\u003eProduct description\u003c\/h3\u003e\u003cp\u003eWater-cooled GT3582 (GT35) billet turbocharger with T3 inlet flange, 4-bolt outlet flange and anti-surge compressor housing. Universal application for 4- and 6-cylinder engines from 2.5L to 6.0L, designed for daily street use and light track use, with up to approx. 600 hp. Without internal wastegate (external wastegate required). This is not a vehicle-specific part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFits:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eUniversal: all 4- and 6-cylinder engines from 2.5L to 6.0L, up to approx. 600 hp\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eOEM \/ part number:\u003c\/strong\u003e no vehicle-specific OEM number; turbo model GT3582 (GT35)\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eExhaust inlet flange (turbo manifold):\u003c\/strong\u003e T3 flange\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eExhaust outlet flange (downpipe):\u003c\/strong\u003e 4-bolt\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eTurbine:\u003c\/strong\u003e trim 84.2, A\/R 0.63, inducer 68 mm, exducer 62.4 mm\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eCompressor:\u003c\/strong\u003e trim 56.9, A\/R 0.70, inducer 61.5 mm, exducer 81.5 mm\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eCompressor inlet \/ outlet:\u003c\/strong\u003e 4 inch (103.5 mm) \/ 2.5 inch (63.6 mm)\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eOil inlet:\u003c\/strong\u003e M10 x 7\/16-24\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eOil outlet:\u003c\/strong\u003e 2x M8 x 1.25\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eWater inlet\/outlet:\u003c\/strong\u003e M14 x 1.5\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eMaximum boost:\u003c\/strong\u003e 22 PSI\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eBearing type:\u003c\/strong\u003e journal bearing, wet\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eCooling:\u003c\/strong\u003e water and oil cooled\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eWastegate:\u003c\/strong\u003e no internal wastegate (external wastegate)\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003ePackaging:\u003c\/strong\u003e 26 x 25 x 23 cm, 8350 g\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eQuantity:\u003c\/strong\u003e 1 turbocharger with required gaskets (no manual)\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eCondition:\u003c\/strong\u003e New\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eWarranty:\u003c\/strong\u003e 1 year on manufacturing defects\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eBillet compressor wheel, fully CNC-machined from forged aluminium for a wider power band and fast response\u003c\/li\u003e\u003cli\u003eSilicon-molybdenum turbine housing, heat resistant up to 850 °C and crack resistant\u003c\/li\u003e\u003cli\u003eK419 alloy turbine wheel, oxidation resistant up to 1000 °C\u003c\/li\u003e\u003cli\u003eLightweight ZL104 aluminium compressor housing; high-speed steel oil seal ring against oil leaks\u003c\/li\u003e\u003cli\u003e100% balance tested with TURBOTECHNICS VSR3\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eCheck fitment\u003c\/h3\u003e\u003cp\u003eBefore ordering, always check the original OEM part number, year of manufacture, engine code and version of your vehicle, as there may be differences between versions. Not sure whether this part fits your vehicle? Feel free to contact us before purchasing.\u003c\/p\u003e","brand":"maxpeedingrods","offers":[{"title":"Default Title","offer_id":54380574179674,"sku":"GGT3582-JD-Z3","price":316.23,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0594\/6379\/4869\/files\/ggt3582-jd-z3_1_bbd5829a-6ea3-4d89-8546-47a0edfce9be.jpg?v=1782908754"},{"product_id":"ball-bearing-billet-turbo-a-r-0-70-for-gt3582-gt354-bolts-universal-turbocharger-ggt3582-nsd","title":"Ball Bearing Billet Turbo A\/R 0.70 for GT3582 GT354 Bolts Universal Turbo","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eUniversal GT3582\/GT35 ball bearing turbocharger with an A\/R of 0.70, suitable for 4 and 6-cylinder engines from 2.5L to 6.0L, up to 600 hp.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eExhaust inlet flange (turbine):\u003c\/strong\u003e T3 flange\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eExhaust outlet flange:\u003c\/strong\u003e 4 bolts\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eTurbine trim:\u003c\/strong\u003e 84.2\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eTurbine A\/R:\u003c\/strong\u003e 0.63\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eTurbine inducer diameter:\u003c\/strong\u003e 68 mm\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eTurbine exducer diameter:\u003c\/strong\u003e 62.4 mm\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eCompressor trim:\u003c\/strong\u003e 56.9\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eCompressor A\/R:\u003c\/strong\u003e 0.7\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eCompressor inducer diameter:\u003c\/strong\u003e 61.5 mm\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eCompressor exducer diameter:\u003c\/strong\u003e 81.5 mm\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eCompressor air intake:\u003c\/strong\u003e 4 inch (103.5 mm)\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eCompressor air outlet:\u003c\/strong\u003e 2.5 inch (63.6 mm)\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eBearing type:\u003c\/strong\u003e dual ceramic ball bearing\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eCooling:\u003c\/strong\u003e water + oil\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003ePower:\u003c\/strong\u003e up to 600 hp\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eTurbo type:\u003c\/strong\u003e loose\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eUniversal fitment:\u003c\/strong\u003e yes\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eFinish:\u003c\/strong\u003e matte\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eWastegate:\u003c\/strong\u003e without wastegate\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eOil supply\/inlet:\u003c\/strong\u003e M10*7\/16-24\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eOil drain\/outlet:\u003c\/strong\u003e 2x M8*1.25\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eWater inlet\/outlet:\u003c\/strong\u003e M14*1.5\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eMax. PSI:\u003c\/strong\u003e 22\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eCondition:\u003c\/strong\u003e 100% new\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003ePackaging dimensions:\u003c\/strong\u003e 27x23x29 cm\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003eScope of delivery\u003c\/h3\u003e\n\u003cp\u003e1x Turbocharger, 2x flange gaskets, 2x oil port gaskets, 2x washers, 1x restrictor, 1x manual, 1x brochure, 1x sticker.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eTurbine housing made of stainless steel, heat resistant up to 1020°C.\u003c\/li\u003e\n\n\u003cli\u003eSteel turbine wheel made of K419 alloy, high oxidation stability and resistance up to 1000°C.\u003c\/li\u003e\n\n\u003cli\u003eCompressor housing made of lightweight ZL104 aluminum.\u003c\/li\u003e\n\n\u003cli\u003eFully CNC machined forged aluminum compressor wheel for a wider power range and maximum turbo response.\u003c\/li\u003e\n\n\u003cli\u003eRacing turbocharger with excellent heat resistance, high efficiency and durability.\u003c\/li\u003e\n\n\u003cli\u003e100% balance test by TURBOTECHNICS VSR3.\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003ePlease note: replace, repair or connect the air filter element according to the manufacturer's manual to prevent damage to the compressor wheel. Ensure the oil drain pipe is lower than the turbo itself. For gasoline engines, a water-cooled system is required to prevent overheating. Ensure the exhaust outlets are properly sealed by welding. The degree of adaptation of this universal turbo depends on your specific vehicle; professional installation is strongly recommended. This turbo is not vehicle-specific; check the specifications and compatibility before ordering.\u003c\/p\u003e\n\u003ch3\u003eCheck fitment\u003c\/h3\u003e\n\u003cp\u003eAlways check the original OEM part number, year of manufacture, engine code and the version of your vehicle before ordering, as differences may exist per version. Unsure if this part fits your vehicle? Feel free to contact us before purchase.\u003c\/p\u003e","brand":"maxpeedingrods","offers":[{"title":"Default Title","offer_id":54380574245210,"sku":"GGT3582-NSD","price":527.71,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0594\/6379\/4869\/files\/ggt3582-nsd_1.jpg?v=1782908757"},{"product_id":"for-gt35-gt3582-turbo-compatible-for-charger-t3-ar-70-63-anti-surge-compressor-turbocharger-bearing-ggt3582-vl","title":"GT35 GT3582 Turbo suitable for Charger T3 AR.70\/63 Anti-Surge Compressor Turbo Charger","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eGT35 GT3582 turbocharger with T3 connection (AR 0.70\/0.63), suitable for 4- and 6-cylinder engines from 3.0L to 6.0L and capable of increasing power up to 600 hp. This is not a vehicle-specific turbo; please check specifications carefully before purchase.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eOil Inlet:\u003c\/strong\u003e M10*7\/16-24\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eOil Outlet:\u003c\/strong\u003e M14.1, 2*M8*1.25\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eWater:\u003c\/strong\u003e M14*1.5\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eExhaust Flange (Turbo Manifold):\u003c\/strong\u003e T3 Flange\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eExhaust Flange (Downpipe):\u003c\/strong\u003e 4 Bolt\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eTurbine Housing Trim:\u003c\/strong\u003e 84.2\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eTurbine A\/R:\u003c\/strong\u003e 0.63\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eTurbine Inducer Diameter:\u003c\/strong\u003e 68 mm\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eTurbine Exducer Diameter:\u003c\/strong\u003e 62.4 mm\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eCompressor Trim:\u003c\/strong\u003e 56.9\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eCompressor A\/R:\u003c\/strong\u003e 0.7\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eCompressor Inducer Diameter:\u003c\/strong\u003e 61.5 mm\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eCompressor Exducer Diameter:\u003c\/strong\u003e 81.5 mm\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eBearing Type:\u003c\/strong\u003e Wet Float\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eCooling:\u003c\/strong\u003e Water + Oil\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eInternal Wastegate:\u003c\/strong\u003e No (External Wastegate)\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eCompressor Inlet Size:\u003c\/strong\u003e 4 inch (103.5 mm)\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eCompressor Outlet Size:\u003c\/strong\u003e 2.5 inch (63.6 mm)\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eMaximum PSI:\u003c\/strong\u003e 22\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e 1 year on manufacturing defects\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eTurbine housing: QT450-10 cast iron housing, heat resistant up to 700 °C.\u003c\/li\u003e\n\n\u003cli\u003eTurbine wheel: Special K418 alloy, high oxidation stability and resistant to temperatures up to 900 °C.\u003c\/li\u003e\n\n\u003cli\u003eCompressor housing: ZL104 aluminum.\u003c\/li\u003e\n\n\u003cli\u003eCompressor wheel\/blades: Aluminum casting with good sealing and corrosion resistance; CNC machined for precision. Each turbo is balanced with VSR machine technology.\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003ePlease note\u003c\/h3\u003e\n\u003cp\u003eProfessional installation is highly recommended. An air filter is necessary to protect the turbo and engine. Insufficient lubrication leads to play and damage to the turbo shaft; ensure sufficient oil pressure and complete lubrication. Ensure the oil return line is lower than the turbo itself. Gasoline engines require water cooling to prevent overheating. Ensure the exhaust outlet is well sealed (welded).\u003c\/p\u003e\n\u003ch3\u003eCheck fitment\u003c\/h3\u003e\n\u003cp\u003eBefore ordering, always check the original OEM part number, year of manufacture, engine code, and the version of your vehicle, as there may be differences per version. Are you unsure whether this part fits your vehicle? Please feel free to contact us before purchase.\u003c\/p\u003e","brand":"maxpeedingrods","offers":[{"title":"Default Title","offer_id":54380574343514,"sku":"GGT3582-VL","price":135.39,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0594\/6379\/4869\/files\/maxpeedingrods-engine-system-ggt3582-28179503906994.jpg?v=1783200132"},{"product_id":"billet-t3-turbo-63a-r-v-band-universal-turbocharger-for-4-6-zyl-420ps-upgrade-ggtt3gen2-jd","title":"Billet T3 Turbo .63A\/R V-Band Universal Turbo for 4\/6 Cyl 420HP Upgrade","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eUniversal billet T3\/T04 turbocharger with V-band exhaust flange, oil-cooled, suitable for 4 or 6 cylinder engines from 1.5 to 2.5 liters.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eExhaust inlet flange:\u003c\/strong\u003e T3 4-bolt flange\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eExhaust outlet flange:\u003c\/strong\u003e V-band\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eTurbine wheel:\u003c\/strong\u003e trim 74.2, A\/R 0.63, inducer 64.8 mm, exducer 55.8 mm\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eTurbine outlet exit:\u003c\/strong\u003e 79 mm; inlet 44.7 mm (l) \/ 85.8 mm (w)\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eCompressor wheel:\u003c\/strong\u003e trim 48.1, A\/R 0.5, inducer 52.7 mm, exducer 76 mm\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eCompressor outlet:\u003c\/strong\u003e 78 mm; inlet 51.5 mm\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eOil inlet:\u003c\/strong\u003e M12*1.25 \/ 2x M8 x 1.25; oil outlet 2x M8 x 1.25\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eBearing:\u003c\/strong\u003e journal bearing\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eCooling:\u003c\/strong\u003e oil-cooled\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eWastegate:\u003c\/strong\u003e with wastegate\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eThrust bearing:\u003c\/strong\u003e 270 degrees\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003ePower:\u003c\/strong\u003e up to 420 hp\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eTurbo type:\u003c\/strong\u003e individual\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eUniversal fitting:\u003c\/strong\u003e yes\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eFinish:\u003c\/strong\u003e polished\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eCondition:\u003c\/strong\u003e new\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003ePackage dimensions:\u003c\/strong\u003e 30 × 28 × 24 cm; weight 9180 g\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003eScope of delivery\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003e1x turbocharger\u003c\/li\u003e\n\n\u003cli\u003e1x flange gasket\u003c\/li\u003e\n\n\u003cli\u003e1x V-band adapter ring and clamp\u003c\/li\u003e\n\n\u003cli\u003e2x oil seals\u003c\/li\u003e\n\n\u003cli\u003e1x bolt\u003c\/li\u003e\n\n\u003cli\u003e1x manual, 1x brochure, 1x sticker\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eSilicon-molybdenum turbine housing, heat and corrosion resistant\u003c\/li\u003e\n\n\u003cli\u003eK419 alloy turbine wheel, high heat resistance\u003c\/li\u003e\n\n\u003cli\u003eCNC-machined forged aluminum compressor wheel for quick response\u003c\/li\u003e\n\n\u003cli\u003eHigh-speed steel oil seal, wear and heat resistant\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003ePlease note\u003c\/h3\u003e\n\u003cp\u003eThis is a universal turbo; the degree of adaptation depends on your vehicle. Before purchasing, please check whether there is sufficient space and whether the specifications match. Before installation, analyze and remedy the cause of any turbo defect. Professional installation is highly recommended.\u003c\/p\u003e\n\u003ch3\u003eCheck fitment\u003c\/h3\u003e\n\u003cp\u003eAlways check the original OEM part number, year of manufacture, engine code and the version of your vehicle before ordering, as there may be differences per version. Are you unsure whether this part fits your vehicle? Please feel free to contact us before purchasing.\u003c\/p\u003e\n","brand":"maxpeedingrods","offers":[{"title":"Default Title","offer_id":54380582502746,"sku":"GGTT3GEN2-JD","price":207.36,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0594\/6379\/4869\/files\/ggtt3gen2-njd_1.jpg?v=1782908877"},{"product_id":"fur-gt45-t4-3-5-v-band-turbo-1-05-a-r-huge-600-hps-upgrade-racing-turbocharger-gt45-jd","title":"For GT45 T4 3.5\" V-Band Turbo 1.05 A\/R Huge 600+HP Upgrade Racing Turbo","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThis GT45 turbocharger with V-Band connection and billet compressor wheel is a universally applicable turbo for daily use and track days.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSuitable for:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eUniversally applicable and suitable for engines from 4.0L to 6.0L. Depending on the vehicle, modifications may be necessary.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eExhaust flange inlet (turbo manifold):\u003c\/strong\u003e T4 flange\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eExhaust flange outlet (downpipe):\u003c\/strong\u003e 3.25\" inlet flange, V-band clamp 4.25\"\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eCompressor trim:\u003c\/strong\u003e 49.6\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eCompressor inductor diameter:\u003c\/strong\u003e 69mm\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eCompressor inducer diameter:\u003c\/strong\u003e 98mm\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eCompressor air inlet:\u003c\/strong\u003e 107mm\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eCompressor air outlet:\u003c\/strong\u003e 86.3mm\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eCompressor A\/R:\u003c\/strong\u003e 0.66\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eTurbine trim:\u003c\/strong\u003e 77.6\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eTurbine inductor diameter:\u003c\/strong\u003e 88mm\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eTurbine inducer diameter:\u003c\/strong\u003e 77.5mm\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eTurbine A\/R:\u003c\/strong\u003e 1.05\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eBearing type:\u003c\/strong\u003e Floating, wet-lubricated\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eCooling:\u003c\/strong\u003e Oil-cooled\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eWastegate:\u003c\/strong\u003e External\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003ePower:\u003c\/strong\u003e up to 600+HP\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eCondition:\u003c\/strong\u003e New\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003ePackaging dimensions:\u003c\/strong\u003e 30x30x27cm\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eOil inlet:\u003c\/strong\u003e M9 and 2x M8x1.25\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eOil outlet:\u003c\/strong\u003e M19 and 2x M8x1.25\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eExhaust flange inlet:\u003c\/strong\u003e T4 Twin Scroll flange\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eTurbine housing: Silicon-molybdenum, temperature resistant up to 850°C.\u003c\/li\u003e\n\n\u003cli\u003eSteel turbine wheel: K419 alloy, high oxidation stability up to 1000°C.\u003c\/li\u003e\n\n\u003cli\u003eCompressor housing: ZL104 aluminum, lightweight.\u003c\/li\u003e\n\n\u003cli\u003eCompressor wheel\/blades: Precision forged aluminum blades, lightweight design.\u003c\/li\u003e\n\n\u003cli\u003eIncreases power by 20-40%.\u003c\/li\u003e\n\n\u003cli\u003eExcellent heat resistance, high efficiency and long service life.\u003c\/li\u003e\n\n\u003cli\u003eAll necessary gaskets included for easy installation.\u003c\/li\u003e\n\n\u003cli\u003e100% balance test by TURBOTECHNICS VSR3.\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003eCheck fitment\u003c\/h3\u003e\n\u003cp\u003eAlways check the original OEM part number, year of manufacture, engine code and vehicle version before ordering, as there may be differences depending on the version. Are you unsure whether this part fits your vehicle? Feel free to contact us before purchase.\u003c\/p\u003e","brand":"maxpeedingrods","offers":[{"title":"Default Title","offer_id":54380583453018,"sku":"GT45-JD","price":296.46,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0594\/6379\/4869\/files\/gt45-njd_1_25da8864-bcaa-44b8-b0fb-6ebf825f09e8.jpg?v=1782908918"},{"product_id":"billet-street-for-gt45-v-band-turbocharger-t4-twin-scroll-4-0l-6-0l-600-ps-gt45-jd-v3","title":"Billet Street for GT45 V-Band Turbo T4 Twin-Scroll 4.0L-6.0L 600+ HP","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eUniversal GT45 turbocharger with V-band connection, suitable for 4.0L-6.0L engines, up to 600+ hp.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSuitable for:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eUniversal application for engines from 4.0L to 6.0L (modifications per vehicle may be necessary)\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eExhaust inlet flange:\u003c\/strong\u003e T4 Twin Scroll flange\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExhaust outlet flange:\u003c\/strong\u003e 3.25 inch inlet, 4.25 inch V-band clamp\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompressor trim:\u003c\/strong\u003e 49.6\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompressor inducer diameter:\u003c\/strong\u003e 69 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompressor exducer diameter:\u003c\/strong\u003e 98 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompressor air inlet:\u003c\/strong\u003e 107 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompressor air outlet:\u003c\/strong\u003e 86.3 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompressor A\/R:\u003c\/strong\u003e 0.66\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTurbine trim:\u003c\/strong\u003e 77.6\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTurbine inducer diameter:\u003c\/strong\u003e 88 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTurbine exducer diameter:\u003c\/strong\u003e 77.5 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTurbine A\/R:\u003c\/strong\u003e 1.05\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBearing type:\u003c\/strong\u003e wet floating bearing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCooling:\u003c\/strong\u003e oil cooled\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOil inlet:\u003c\/strong\u003e M9 \u0026amp; 2x M8x1.25\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOil outlet:\u003c\/strong\u003e M19 \u0026amp; 2x M8x1.25\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWastegate:\u003c\/strong\u003e without wastegate\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower:\u003c\/strong\u003e up to 600+ hp\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e individual\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUniversal fit:\u003c\/strong\u003e yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e matte\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCondition:\u003c\/strong\u003e brand new\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eSilicon-Molybdenum turbine housing: high temperature resistant, corrosion and crack resistant\u003c\/li\u003e\n\u003cli\u003eK419 alloy turbine wheel: heat resistant, efficiently converts exhaust gases into kinetic energy\u003c\/li\u003e\n\u003cli\u003eCNC machined billet aluminum compressor wheel: high efficiency, fast response\u003c\/li\u003e\n\u003cli\u003eHigh-speed steel oil seal: wear-resistant and heat-resistant, prevents oil leakage\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCheck fitment\u003c\/h3\u003e\u003cp\u003eBefore ordering, always check the original OEM part number, year of manufacture, engine code and the trim level of your vehicle, as there may be differences per trim level. Are you unsure whether this part fits your vehicle? Please feel free to contact us before purchase.\u003c\/p\u003e","brand":"maxpeedingrods","offers":[{"title":"Default Title","offer_id":54380583485786,"sku":"GT45-JD-V3","price":473.0,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0594\/6379\/4869\/files\/gt45-njd_1_d8c988de-1e81-4cb0-8a67-a9aefdc5aeeb.jpg?v=1782908919"},{"product_id":"universal-for-gt45-gt45r-turbocharger-t4-v-band-brida-a-r-0-66-a-r-1-05-600-hp-gt45-vl","title":"Universal for GT45 GT45R Turbo T4 V-band flange A\/R 0.66 A\/R 1.05 600+HP","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eUniversal GT45\/GT45R turbocharger with T4 V-band flange, suitable for engines from 4.0L to 6.0L. Depending on the specific vehicle, modification may be required.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eExhaust inlet flange:\u003c\/strong\u003e T4 twin-scroll flange\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eExhaust outlet flange:\u003c\/strong\u003e 3.25\" inlet, 4.25\" V-band clamp\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eBearing type:\u003c\/strong\u003e Wet float\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eCooling:\u003c\/strong\u003e Oil-cooled\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eOil inlet:\u003c\/strong\u003e M9 and 2*M8*1.25\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eOil outlet:\u003c\/strong\u003e M19 and 2*M8*1.25\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eWastegate:\u003c\/strong\u003e Without wastegate\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003ePower:\u003c\/strong\u003e Up to 600+ HP\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eTurbo type:\u003c\/strong\u003e Single\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eUniversal fitment:\u003c\/strong\u003e Yes\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Matte\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eCondition:\u003c\/strong\u003e New\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eCompressor wheel inducer diameter:\u003c\/strong\u003e 69 mm\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eCompressor wheel exducer diameter:\u003c\/strong\u003e 98 mm\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eCompressor air inlet size:\u003c\/strong\u003e 107 mm\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eCompressor air outlet size:\u003c\/strong\u003e 86.3 mm\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eCompressor A\/R:\u003c\/strong\u003e 0.66\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eTurbine wheel inducer diameter:\u003c\/strong\u003e 88 mm\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eTurbine wheel exducer diameter:\u003c\/strong\u003e 77.5 mm\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eTurbine A\/R:\u003c\/strong\u003e 1.05\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eTurbine housing made of nodular cast iron QT450-10, resistant to temperatures up to 700 ℃\u003c\/li\u003e\n\n\u003cli\u003eTurbine wheel made of steel, K418 alloy, high oxidation resistance and resistant to temperatures up to 900 ℃\u003c\/li\u003e\n\n\u003cli\u003eCompressor housing made of lightweight ZL104 aluminum\u003c\/li\u003e\n\n\u003cli\u003eCast aluminum compressor impeller: excellent sealing and corrosion resistance\u003c\/li\u003e\n\n\u003cli\u003eIncreases power by 20-40%\u003c\/li\u003e\n\n\u003cli\u003eHigh-speed seal ring and precision clearance\u003c\/li\u003e\n\n\u003cli\u003e100% balancing test by TURBOTECHNICS VSR3\u003c\/li\u003e\n\n\u003cli\u003eVNT G3-min-flow turbo test\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003ePlease note\u003c\/h3\u003e\n\u003cp\u003ePlease check the specifications carefully before ordering. Professional installation is highly recommended (no instructions included). Additional parts are required for a complete installation; consult a professional turbo installer. This turbo does not have an internal wastegate, so an external wastegate must be present on the manifold.\u003c\/p\u003e\n\u003ch3\u003eCheck fitment\u003c\/h3\u003e\n\u003cp\u003eBefore ordering, always check the original OEM part number, year of manufacture, engine code, and the version of your vehicle, as there may be differences per version. Are you unsure if this part fits your vehicle? Feel free to contact us before purchasing.\u003c\/p\u003e","brand":"maxpeedingrods","offers":[{"title":"Default Title","offer_id":54380583518554,"sku":"GT45-VL","price":276.05,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0594\/6379\/4869\/files\/gt45-nvl_1.jpg?v=1782908921"},{"product_id":"turbocharger-fur-gt45-gt45r-t4-v-band-flansch-a-r-66-a-r-1-05-turbo-600-ps-4-0l-6-0l-gt45-vl-v2","title":"Turbo for GT45 GT45R T4 V-band Flange A\/R .66 A\/R 1.05 Turbo 600+HP 4.0L-6.0L","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThis GT45\/GT45R turbocharger with T4 flange and V-band connection is a universal turbo, suitable for 4.0L-6.0L engines; modifications may be required depending on the vehicle.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eExhaust Flange:\u003c\/strong\u003e T4 Flange\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eOutlet:\u003c\/strong\u003e 3.25\" Inlet Flange, 4.25\" V-Band Clamp\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eBearing Type:\u003c\/strong\u003e Wet Float Bearing\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eCooling:\u003c\/strong\u003e Oil-cooled\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eOil Inlet:\u003c\/strong\u003e M9 \u0026amp; 2x M8x1.25\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eOil Outlet:\u003c\/strong\u003e M19 \u0026amp; 2x M8x1.25\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eWastegate:\u003c\/strong\u003e Without Wastegate\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003ePower:\u003c\/strong\u003e Up to 600+ HP\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eTurbo Type:\u003c\/strong\u003e Single\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eUniversal Fitment:\u003c\/strong\u003e Yes\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Matte\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eCondition:\u003c\/strong\u003e Brand New\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003ePackage Dimensions:\u003c\/strong\u003e 30 x 30 x 27 cm\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eCompressor Trim:\u003c\/strong\u003e 49.6\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eCompressor Inducer Diameter:\u003c\/strong\u003e 69 mm\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eCompressor Exducer Diameter:\u003c\/strong\u003e 98 mm\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eCompressor Air Inlet:\u003c\/strong\u003e 107 mm\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eCompressor Air Outlet:\u003c\/strong\u003e 86.3 mm\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eCompressor A\/R:\u003c\/strong\u003e 0.66\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eTurbine Trim:\u003c\/strong\u003e 77.6\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eTurbine Inducer Diameter:\u003c\/strong\u003e 88 mm\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eTurbine Exducer Diameter:\u003c\/strong\u003e 77.5 mm\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eTurbine A\/R:\u003c\/strong\u003e 1.05\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eTurbine housing made of QT450-10 spheroidal cast iron, temperature resistant up to 700℃\u003c\/li\u003e\n\n\u003cli\u003eTurbine wheel made of steel (K418 alloy), high oxidation stability and resistant to temperatures up to 900℃\u003c\/li\u003e\n\n\u003cli\u003eCompressor housing made of lightweight ZL104 aluminum\u003c\/li\u003e\n\n\u003cli\u003eCompressor wheel\/blades made of cast aluminum, airtight and corrosion-resistant\u003c\/li\u003e\n\n\u003cli\u003e100% balance tested by TURBOTECHNICS VSR3\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003eCheck Fitment\u003c\/h3\u003e\n\u003cp\u003eAlways check the original OEM part number, year of manufacture, engine code, and your vehicle's trim level before ordering, as differences may exist per trim level. Unsure if this part fits your vehicle? Feel free to contact us before purchasing.\u003c\/p\u003e","brand":"maxpeedingrods","offers":[{"title":"Default Title","offer_id":54380583551322,"sku":"GT45-VL-V2","price":221.05,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0594\/6379\/4869\/files\/gt45-nvl_1_6ca73b76-9cd7-40ba-9856-af64c38eff15.jpg?v=1782908921"},{"product_id":"gt45-turbo-v-band-twin-scroll-a-r-66-a-r-1-05-98-mm-bis-600-ps-oliegekoeld","title":"GT45 turbo V-Band twin-scroll A\/R .66 A\/R 1.05 98 mm up to 600 hp oil-cooled","description":"\u003cp\u003eNew MaXpeedingRods turbo, aftermarket in OE quality. From local stock, delivered quickly and with a warranty against manufacturing defects.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e always compare the OE \/ part number with your original before purchase.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e✔ New, aftermarket in OE quality\u003c\/li\u003e\n\u003cli\u003e✔ From local stock — delivered quickly\u003c\/li\u003e\n\u003cli\u003e✔ Warranty against manufacturing defects\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Maxpeedingrods","offers":[{"title":"Default Title","offer_id":54440314470746,"sku":"GT45-NVL","price":210.48,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0594\/6379\/4869\/files\/maxpeedingrods-einstiegslevel-turbolader-gt45-vl-v2-36761046188229.jpg?v=1784307273"},{"product_id":"billet-kompressorrad-street-performance-gt45-v-band-turbo-t4-twin-scroll-a-r-66","title":"Billet compressor wheel GT45 V-Band turbo T4 twin-scroll A\/R .66 street performance","description":"\u003cp\u003eNew MaXpeedingRods turbo, aftermarket in OE quality. From local stock, delivered quickly and with a warranty against manufacturing defects.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e always compare the OE \/ part number with your original before purchase.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e✔ New, aftermarket in OE quality\u003c\/li\u003e\n\u003cli\u003e✔ From local stock — delivered quickly\u003c\/li\u003e\n\u003cli\u003e✔ Warranty against manufacturing defects\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Maxpeedingrods","offers":[{"title":"Default Title","offer_id":54440335311194,"sku":"GT45-NJD","price":361.69,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0594\/6379\/4869\/files\/maxpeedingrods-turbo-gt45-jd-32657970593989.jpg?v=1784308489"},{"product_id":"turbo-gt3582-t3-spruitstuk-geschikt-voor-nissan-patrol-safari-4-2l-td42-tb42","title":"Turbo GT3582 + T3 manifold compatible with Nissan Patrol Safari 4.2L TD42 TB42","description":"\u003ch3\u003eProduct description\u003c\/h3\u003e\n\u003cp\u003eGT3582 turbocharger with matching T3 exhaust manifold (top-mount) for the Nissan Patrol\/Safari. New, aftermarket in OE quality.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCompatible with:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eNissan Patrol \/ Safari Y60 GR 4.2L petrol TB42 \/ TB42S \/ TB42E\u003c\/li\u003e\n\u003cli\u003eNissan Patrol \/ Safari Y60 GR 4.5L petrol TB45 \/ TB45S \/ TB45E\u003c\/li\u003e\n\u003cli\u003eNissan Patrol \/ Safari Y60 GR\/GQ 4.2L (turbo)diesel TD42\u003c\/li\u003e\n\u003cli\u003eNissan Patrol \/ Safari Y61 GR 4.2L diesel TD42 \/ TD422 \/ TD42T3\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTurbo model:\u003c\/strong\u003e GT3582 \/ GT35\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManifold:\u003c\/strong\u003e T3, top-mount \/ high-mount, external wastegate 38 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTurbine flange (inlet):\u003c\/strong\u003e T3 flange\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutlet flange:\u003c\/strong\u003e 4-bolt\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTurbine Trim \/ A\/R:\u003c\/strong\u003e 84.2 \/ 0.63 (inducer 68 mm, exducer 62.4 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompressor Trim \/ A\/R:\u003c\/strong\u003e 56.9 \/ 0.7 (inducer 61.5 mm, exducer 81.5 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInlet \/ outlet:\u003c\/strong\u003e 4 inch (103.5 mm) \/ 2.5 inch (63.6 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBearing:\u003c\/strong\u003e Journal bearing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCooling:\u003c\/strong\u003e Oil- and water-cooled\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum pressure:\u003c\/strong\u003e 22 PSI\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eScope of delivery:\u003c\/strong\u003e Turbo + T3 exhaust manifold\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCondition:\u003c\/strong\u003e 100% new\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e 2 years against manufacturing defects\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCheck the fitment\u003c\/h3\u003e\n\u003cp\u003eNote: this is an aftermarket turbo; modification may be required depending on the vehicle. On TB42, TD45 and TB45 engines the connections are the same. Always check the original OEM part number, year, engine code and the version of your vehicle before ordering. Not sure whether this part fits your vehicle? Please feel free to contact us before purchase.\u003c\/p\u003e","brand":"Maxpeedingrods","offers":[{"title":"Default Title","offer_id":54468922016090,"sku":"GGT3582-VL-Z3_MFTD42-G-Z4","price":220.37,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0594\/6379\/4869\/files\/maxpeedingrods-neu-ggt3582gen2-jd-1213029135_a85ff537-be89-4308-b25b-5dcea6b2afab.jpg?v=1784888927"},{"product_id":"turbo-uitlaatspruitstuk-t3-4-gaats-v-band-universeel-1-5-2-5l-4-6-cilinder-3002912594","title":"Turbo exhaust manifold T3 4-bolt V-Band universal 1.5-2.5L 4\/6-cylinder 3002912594","description":"\u003ch3\u003eProduct description\u003c\/h3\u003e\n\u003cp\u003eUniversal T3 turbo exhaust manifold with 4-bolt flange and V-Band outlet, compatible with 4- and 6-cylinder petrol and diesel engines from 1.5 to 2.5 litres. New, aftermarket in OE quality.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCompatible with:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eUniversal application: all 4- or 6-cylinder engines, 1.5-2.5 litre\u003c\/li\u003e\n\u003cli\u003eCompatible makes: BMW, Ford, Mazda, Mercedes-Benz, Volvo\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOEM \/ part number:\u003c\/strong\u003e 3002912594\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTurbo flange:\u003c\/strong\u003e T3, 4-bolt flange\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutlet:\u003c\/strong\u003e V-Band flange (ID\/OD: 2.5\"\/3.1\")\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting type:\u003c\/strong\u003e top-mount \/ high-mount\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExternal wastegate:\u003c\/strong\u003e 38 mm, blankable (blanking plate included)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e high-grade cast iron, heat resistant\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCondition:\u003c\/strong\u003e 100% new\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e 2 years against manufacturing defects\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eOptimised exhaust flow for faster turbo response\u003c\/li\u003e\n\u003cli\u003eSpecial design for higher volumetric efficiency and more power\u003c\/li\u003e\n\u003cli\u003eSpecial surface treatment for corrosion resistance\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCheck the fitment\u003c\/h3\u003e\n\u003cp\u003eAlways check the original OEM part number, year, engine code and the version of your vehicle before ordering, as there may be differences between versions. Not sure whether this part fits your vehicle? Please feel free to contact us before purchase.\u003c\/p\u003e","brand":"Maxpeedingrods","offers":[{"title":"Default Title","offer_id":54468999381338,"sku":"BF-GGTT3_MFTD42-G-Z4","price":252.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0594\/6379\/4869\/files\/maxpeedingrods-neu-bf-ggtt3-mftd42-g-z4-1246227472.jpg?v=1784885997"},{"product_id":"turbo-laadluchtbuizen-set-2-5-inch-aluminium-universeel-1-5-2-5l-4-6-cilinder-3002912598","title":"Turbo charge pipe kit 2.5 inch aluminium universal 1.5-2.5L 4\/6-cylinder 3002912598","description":"\u003ch3\u003eProduct description\u003c\/h3\u003e\n\u003cp\u003eUniversal charge pipe kit made of aluminium, 2.5 inch, for turbo setups on 4- and 6-cylinder engines from 1.5 to 2.5 litres. New, aftermarket in OE quality.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCompatible with:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eUniversal application: all 4- or 6-cylinder engines, 1.5-2.5 litre\u003c\/li\u003e\n\u003cli\u003eCompatible makes: BMW, Ford, Mazda, Mercedes-Benz, Volvo\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOEM \/ part number:\u003c\/strong\u003e 3002912598\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePipe diameter:\u003c\/strong\u003e 2.5 inch, wall thickness 1.8 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContents:\u003c\/strong\u003e 2x aluminium pipe 90°, 2x straight aluminium pipe, 2x aluminium pipe 135°, 2x U-shaped aluminium pipe, 6x straight silicone hose, 2x silicone hose 90°, 16x clamps\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e aluminium pipes with silicone hoses\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCondition:\u003c\/strong\u003e 100% new\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e 2 years against manufacturing defects\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eImproved charge air flow for optimum boost pressure\u003c\/li\u003e\n\u003cli\u003eLightweight aluminium with flexible silicone connections\u003c\/li\u003e\n\u003cli\u003eComplete kit including hoses and clamps\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCheck the fitment\u003c\/h3\u003e\n\u003cp\u003eAlways check the original OEM part number, year, engine code and the version of your vehicle before ordering, as there may be differences between versions. Not sure whether this part fits your vehicle? Please feel free to contact us before purchase.\u003c\/p\u003e","brand":"Maxpeedingrods","offers":[{"title":"Default Title","offer_id":54468999709018,"sku":"BF-GGTT3_PP-25-18","price":350.82,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0594\/6379\/4869\/files\/maxpeedingrods-neu-bf-ggtt3-pp-25-18-1246227477.jpg?v=1784886029"},{"product_id":"universele-billet-turbo-kogellager-t25-geschikt-voor-1-4-3-0l-motoren-tot-660-pk","title":"Universal billet turbo ball bearing T25 compatible with 1.4-3.0L engines up to 660 hp","description":"\u003ch3\u003eProduct description\u003c\/h3\u003e\u003cp\u003eUniversal billet turbocharger with dual ceramic ball bearing, compatible with engines from 1.4 to 3.0 litres with an output of up to 660 hp. New, aftermarket in OE quality.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCompatible with:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eUniversal: engines 1.4 - 3.0 litres, 350-660 hp (not vehicle-specific)\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOEM \/ part number:\u003c\/strong\u003e GT14303566-NSD\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Billet universal turbo with ball bearing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower:\u003c\/strong\u003e 350-660 hp\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompressor:\u003c\/strong\u003e inducer 54.4 mm \/ exducer 67.4 mm, A\/R 0.70\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTurbine:\u003c\/strong\u003e T25 flange, A\/R 0.49, 3\" V-band outlet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBearing:\u003c\/strong\u003e dual ceramic ball bearing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCooling:\u003c\/strong\u003e Water and oil cooling\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCondition:\u003c\/strong\u003e 100% new\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e 2 years against manufacturing defects\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCheck the fitment\u003c\/h3\u003e\u003cp\u003eThis is a universal turbocharger that is not vehicle-specific. Always check the specifications and compatibility with your engine and version before ordering. Not sure whether this part is suitable? Please feel free to contact us before purchase.\u003c\/p\u003e","brand":"Maxpeedingrods","offers":[{"title":"Default Title","offer_id":54470256558426,"sku":"GT14303566-NSD","price":810.35,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0594\/6379\/4869\/files\/maxpeedingrods-turbo-gt14303566-sd-36761047990469_95ff2fd7-6bb2-4bc0-a581-f351eec65896.jpg?v=1784892549"},{"product_id":"turbolader-universeel-billet-t3-t4-tot-400-pk-compressor-a-r-0-5-turbine-a-r-0-57","title":"Turbocharger universal billet T3\/T4 up to 400+ hp compressor A\/R 0.5 turbine A\/R 0.57","description":"\u003ch3\u003eProduct description\u003c\/h3\u003e\n\u003cp\u003eUniversal billet turbocharger for daily street use and light track use, compatible with 4- and 6-cylinder engines from 1.5L to 2.5L with a forced billet compressor wheel. New, aftermarket in OE quality.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCompatible with:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eUniversal - 4\/6-cylinder engines 1.5L-2.5L\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOEM \/ part number:\u003c\/strong\u003e GGT04E57-NJD\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExhaust inlet flange:\u003c\/strong\u003e T3\/T4 4-bolt\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDownpipe flange:\u003c\/strong\u003e T3 5-bolt\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompressor A\/R:\u003c\/strong\u003e 0.5\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTurbine A\/R:\u003c\/strong\u003e 0.57\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower:\u003c\/strong\u003e up to 400+ hp\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCooling:\u003c\/strong\u003e oil-cooled\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWastegate:\u003c\/strong\u003e without internal wastegate (external wastegate required)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCondition:\u003c\/strong\u003e 100% new\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e 2 years against manufacturing defects\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCheck the fitment\u003c\/h3\u003e\n\u003cp\u003eAlways check the specifications and the available installation space in your vehicle before ordering, as this is a universal turbocharger. Not sure whether this part fits your vehicle? Please feel free to contact us before purchase.\u003c\/p\u003e","brand":"Maxpeedingrods","offers":[{"title":"Default Title","offer_id":54473514615130,"sku":"GGT04E57-NJD","price":284.61,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0594\/6379\/4869\/files\/maxpeedingrods-turbo-ggt04e57-jd-z2-33082155860165.jpg?v=1784962587"},{"product_id":"universele-turbo-t3-t4-t04e-0-63-a-r-geschikt-voor-1-5l-2-5l-motoren-tot-400-pk","title":"Universal turbo T3\/T4 T04E 0.63 A\/R compatible with 1.5L-2.5L engines up to 400 hp","description":"\u003ch3\u003eProduct description\u003c\/h3\u003e\n\u003cp\u003eUniversal T3\/T4 T04E turbocharger for 4- and 6-cylinder engines from 1.5L to 2.5L. New, aftermarket in OE quality.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCompatible with:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAll 4- or 6-cylinder engines from 1.5L to 2.5L (universal application)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eExhaust flange (exhaust manifold):\u003c\/strong\u003e T3\/T4, 4-bolt flange pattern\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDownpipe flange:\u003c\/strong\u003e standard T3, 5-bolt\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCooling:\u003c\/strong\u003e oil-cooled\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWastegate:\u003c\/strong\u003e external wastegate\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompressor:\u003c\/strong\u003e trim 48.1 \/ A\/R 0.5 \/ inducer 52.7 mm \/ exducer 76 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTurbine:\u003c\/strong\u003e trim 74.2 \/ A\/R 0.63\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower:\u003c\/strong\u003e up to 400+ hp\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCondition:\u003c\/strong\u003e 100% new\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e 2 years against manufacturing defects\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eTurbine housing made of silicon-molybdenum, heat-resistant up to 850 degrees C\u003c\/li\u003e\n\u003cli\u003eTurbine wheel made of K419 alloy, resistant up to 1000 degrees C\u003c\/li\u003e\n\u003cli\u003eCompressor housing made of lightweight ZL104 aluminium\u003c\/li\u003e\n\u003cli\u003e100% balance tested (TURBOTECHNICS VSR3)\u003c\/li\u003e\n\u003cli\u003eAll necessary gaskets for easy installation included\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCheck the fitment\u003c\/h3\u003e\n\u003cp\u003eAlways check the original OEM part number, year, engine code and the version of your vehicle before ordering, as there may be differences between versions. Not sure whether this part fits your vehicle? Please feel free to contact us before purchase.\u003c\/p\u003e","brand":"Maxpeedingrods","offers":[{"title":"Default Title","offer_id":54477332578650,"sku":"GGT04E63-JD-Z3","price":284.61,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0594\/6379\/4869\/files\/maxpeedingrods-universal-strasse-version-turbo-ggt04e63-jd-z3-1244635787_2d410b7c-8a0a-4ee2-8229-320691d4f83f.jpg?v=1785139434"},{"product_id":"turbo-gt3037-gt3076r-billet-a-r-0-63-water-olie-racing-300-700ps-universeel","title":"Turbo GT3037 GT3076R billet A\/R 0.63 water+oil racing 300-700PS universal","description":"\u003ch3\u003eProduct description\u003c\/h3\u003e\n\u003cp\u003eUpgrade and race turbocharger GT3037 GT3076R with billet (forged and CNC-machined) compressor wheel, water- and oil-cooled. New, aftermarket in OE quality.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCompatible with:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eUniversal: 2.0L-3.0L engines (petrol\/diesel), depending on setup approx. 300-700 PS\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTurbo model:\u003c\/strong\u003e GT3037 \/ GT3076R\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompressor wheel:\u003c\/strong\u003e billet, inducer 55 mm \/ exducer 76.1 mm, A\/R 0.63, trim 52\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTurbine wheel:\u003c\/strong\u003e inducer 61 mm \/ exducer 54.8 mm, A\/R 0.82, trim 81\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCooling:\u003c\/strong\u003e oil + water\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBearing:\u003c\/strong\u003e journal bearing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExhaust flange:\u003c\/strong\u003e V-band\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompressor housing:\u003c\/strong\u003e anti-surge\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMax. boost pressure:\u003c\/strong\u003e up to 3.0 bar\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower:\u003c\/strong\u003e up to approx. 300-700 PS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCondition:\u003c\/strong\u003e 100% new\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e 2 years against manufacturing defects\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCheck the fitment\u003c\/h3\u003e\n\u003cp\u003eAlways check the engine specification, desired power targets and mounting method before ordering, as there may be differences between applications. Not sure whether this turbo is suitable for your application? Please feel free to contact us before purchase.\u003c\/p\u003e","brand":"Maxpeedingrods","offers":[{"title":"Default Title","offer_id":54477333594458,"sku":"GT3076-SD-Z2","price":656.18,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0594\/6379\/4869\/files\/maxpeedingrods-turbo-gt3076-sd-z2-29436113125573.jpg?v=1785139518"},{"product_id":"universele-turbo-t25-0-60-a-r-geschikt-voor-1-5l-2-0l-4-cilinder-motoren-tot-350-pk","title":"Universal turbo T25 0.60 A\/R compatible with 1.5L-2.0L 4-cylinder engines up to 350 hp","description":"\u003ch3\u003eProduct description\u003c\/h3\u003e\n\u003cp\u003eUniversal water-cooled turbocharger with 0.60 A\/R compressor for 1.5L-2.0L 4-cylinder engines with T25 flange. New, aftermarket in OE quality.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCompatible with:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAll 1.5L-2.0L 4-cylinder engines with T25 flange turbo manifold (T28 flange possible via adapter) - universal application\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eInlet flange:\u003c\/strong\u003e standard T25\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutlet flange:\u003c\/strong\u003e 5-bolt flange\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTurbine:\u003c\/strong\u003e trim 76.3 \/ A\/R 0.64\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompressor:\u003c\/strong\u003e trim 48 \/ A\/R 0.60\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCooling:\u003c\/strong\u003e water- and oil-cooled\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWastegate:\u003c\/strong\u003e internal wastegate\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower:\u003c\/strong\u003e up to 350 hp\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCondition:\u003c\/strong\u003e 100% new\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e 2 years against manufacturing defects\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eTurbine housing made of nodular cast iron QT450-10, heat-resistant up to 700 degrees C\u003c\/li\u003e\n\u003cli\u003eTurbine wheel made of K418 alloy, resistant up to 900 degrees C\u003c\/li\u003e\n\u003cli\u003eCompressor housing made of lightweight ZL104 aluminium\u003c\/li\u003e\n\u003cli\u003eTUV ISO 9001 certified, 100% balance tested, including gaskets\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCheck the fitment\u003c\/h3\u003e\n\u003cp\u003eAlways check the original OEM part number, year, engine code and the version of your vehicle before ordering, as there may be differences between versions. Not sure whether this part fits your vehicle? Please feel free to contact us before purchase.\u003c\/p\u003e","brand":"Maxpeedingrods","offers":[{"title":"Default Title","offer_id":54477346701658,"sku":"GGT2871-NPVL","price":181.19,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0594\/6379\/4869\/files\/maxpeedingrods-einstiegslevel-turbolader-ggt2871-npvl-1199290080.jpg?v=1785139837"},{"product_id":"sport-turbo-t25-t28-gt25-gt28-gt2871-gt2860-billet-250-480-pk-universeel-1-6-2-5l","title":"Sport turbo T25 T28 GT25 GT28 GT2871 GT2860 billet 250-480 hp universal 1.6-2.5L","description":"\u003ch3\u003eProduct description\u003c\/h3\u003e\u003cp\u003eUniversal sport and racing turbocharger with billet (CNC-machined) compressor wheel for 1.6L to 2.5L engines, good for a power gain of up to 250-480 hp. New, aftermarket in OE quality.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCompatible with:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eUniversal, all petrol and diesel engines from 1.6L to 2.5L\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOEM \/ part number:\u003c\/strong\u003e GGT2860-NSD\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTurbo model:\u003c\/strong\u003e T25 \/ T28 \/ GT25 \/ GT28 \/ GT2871 \/ GT2860\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower gain:\u003c\/strong\u003e 250-480 hp\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCooling:\u003c\/strong\u003e water + oil\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompressor housing:\u003c\/strong\u003e aluminium alloy\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTurbine housing:\u003c\/strong\u003e cast iron\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBearing type:\u003c\/strong\u003e ball bearing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInternal wastegate:\u003c\/strong\u003e yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlanges:\u003c\/strong\u003e T25 4-bolt (manifold side), 5-bolt (downpipe)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCondition:\u003c\/strong\u003e 100% new\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e 2 years against manufacturing defects\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMachined billet compressor wheel for faster boost response\u003c\/li\u003e\n\u003cli\u003eTurbine wheel made of heat-resistant K419 alloy\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCheck the fitment\u003c\/h3\u003e\u003cp\u003eAlways check the original OEM part number, year, engine code and the version of your vehicle before ordering, as there may be differences between versions. Not sure whether this part fits your vehicle? Please feel free to contact us before purchase.\u003c\/p\u003e","brand":"Maxpeedingrods","offers":[{"title":"Default Title","offer_id":54477349880154,"sku":"GGT2860-NSD","price":611.72,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0594\/6379\/4869\/files\/maxpeedingrods-turbo-ggt2860-sd-v3-35109427249349.jpg?v=1785139893"},{"product_id":"turbokit-t3-t4-hybride-450-pk-geschikt-voor-honda-d-serie-d15-d15z1-met-spruitstuk-intercooler-amp-blow-off","title":"Turbo kit T3\/T4 hybrid 450 hp suitable for Honda D-series D15 D15Z1 with manifold, intercooler \u0026 blow-off","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eComplete T3\/T4 hybrid turbo kit for Honda D-series engines, up to approximately 450 hp. Includes cast iron exhaust manifold, aluminium intercooler with piping kit, wastegate, blow-off valve, boost controller, oil return line, fuel line and catch tank.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSuitable for:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHonda Civic D15\u003c\/li\u003e\n\u003cli\u003eHonda D-series engines, including D15Z1\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eT3\/T4 hybrid turbocharger\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower:\u003c\/strong\u003e approximately 450 hp\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInlet:\u003c\/strong\u003e 3 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutlet:\u003c\/strong\u003e 2 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBearing type:\u003c\/strong\u003e hybrid journal bearing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOil inlet size:\u003c\/strong\u003e M10 × 1.25\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExhaust flange:\u003c\/strong\u003e 35 mm and 38 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompressor housing A\/R:\u003c\/strong\u003e 0.50\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompressor wheel:\u003c\/strong\u003e exd 3\", ind 1.99\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTurbine housing:\u003c\/strong\u003e 0.63 A\/R\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTurbine wheel:\u003c\/strong\u003e exd 2.2\", ind 2.56\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting:\u003c\/strong\u003e 5-bolt flange\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eExhaust manifold\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e cast iron\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInlet diameter:\u003c\/strong\u003e 38 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGasket included\u003c\/strong\u003e (the first production batch was supplied without a gasket)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eIntercooler\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e aluminium\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall size:\u003c\/strong\u003e 27 × 7 × 2.5\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCore size:\u003c\/strong\u003e 21 × 5.5 × 2.25\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInlet diameter:\u003c\/strong\u003e 2.5\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutlet diameter:\u003c\/strong\u003e 2.5\"\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eIntercooler piping\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePipe diameter:\u003c\/strong\u003e 2.5\"\u003c\/li\u003e\n\u003cli\u003e4× aluminium pipe\u003c\/li\u003e\n\u003cli\u003e6× silicone hose\u003c\/li\u003e\n\u003cli\u003e13× T-bolt clamp\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eOther components\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFuel line:\u003c\/strong\u003e 24\" AN10 stainless steel braided hose\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOil return line:\u003c\/strong\u003e aluminium, long stainless steel braided hose, AN3\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWastegate:\u003c\/strong\u003e aluminium alloy, 38 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlow-off valve:\u003c\/strong\u003e aluminium alloy\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBoost controller:\u003c\/strong\u003e aluminium alloy with hose\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCatch tank:\u003c\/strong\u003e aluminium alloy, length 6\", diameter 3.25\", hose 30\" with 9 mm inner diameter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCondition:\u003c\/strong\u003e New\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e professional installation and tuning are required. A turbo conversion may require changes to the engine management and fuel system.\u003c\/p\u003e\n\u003ch3\u003eCheck Fitment\u003c\/h3\u003e\n\u003cp\u003eAlways check the engine code and vehicle version before ordering, as there may be differences depending on the version. If you are unsure whether this kit fits your engine, please feel free to contact us before purchasing.\u003c\/p\u003e","brand":"Maxpeedingrods","offers":[{"title":"Default Title","offer_id":54648484921690,"sku":"GGTD1516-KIT-N-VL-Z2","price":1551.53,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0594\/6379\/4869\/files\/maxpeedingrods-turbo-ggtd1516-kit-31958086025413.jpg?v=1787829819"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0594\/6379\/4869\/collections\/ggtt3-vl-z3_1_f2046872-f306-4e7a-ab9c-8f06058c9270.jpg?v=1787956148","url":"https:\/\/www.maxpeedingrods.eu\/collections\/turbo-universeel.oembed","provider":"MaXpeedingRods","version":"1.0","type":"link"}