maXpeedingrods Coilovers compatible for Ford Fiesta Mk7 1.0 1.25 1.4 1.5 1.6 TDCi 2008-2017
maXpeedingrods Coilovers compatible for Ford Fiesta Mk7 1.0 1.25 1.4 1.5 1.6 TDCi 2008-2017
- ✓ Price includes VAT — no surprises later
- ✓ Fast shipping from our own stock
- ✓ 100% new, aftermarket in OE quality
- ✓ 2-year warranty against manufacturing defects
Introduction
maXpeedingrods'maXpeedingrods-B1 series is ideal for those who want to change the old worn-out strut but improve handling at the same time. It features height adjustable and maintains the OE ride quality to the greatest extent.
Application
Compatible for Ford Fiesta MKVI JA8 All Engines 2008-2019
compatible for Ford Fiesta MK7 JA8 Mark VII (UK models) 2008-2019
Specification
Top mounts：OE top mounts required
Damping adjustable: Not available
Camber adjustable: Not available
Height adjustable: Yes, lowering 0-25mm depending on the vehicle models
Spring Rate Front: 3 kg/mm (168 lbs/in)
Spring Rate Rear:2.4 kg/mm (134.4 lbs/in)
Front spring inner diameter: 62-83 mm
Rear spring inner diameter: 58-62 mm
Spring length Front: 227 mm
Spring length Rear: 260 mm
Spring Preload advised: 7-10 mm
Color: Silver body with golden spring
Package included
Package included：
2x Front coil-overs
2x Rear coil-overs
2x C spanners
Dimension
Package Size: 70*50*20 cm
Weight: 19600 g
Feature
1. 0-25mm(depends on vehicle models) lower height adjustable
2. Dust boot, solid rubber bump stops
3. Aluminum components and steel lower mount brackets designed to balance weight and structural requirements.
4. Simple install, Easy to adjust.
5. Use the vehicle's original upper mounts (not included in our product kit).
Note
1. All modifications must be installed by licensed mechanics and in compliance with your local modification regulations.
2. Please ensure all components are tightened with correct torque specifications (which can be found in the vehicle service manual)before and after installation. Any loose nuts, bolts, or locks will cause noise. Do check and tighten before serious problems happen.
3. Impact wrench is prohibited during the installation, it will loosen or damage the product.
4. Examine the clearance between tires and suspension. ( The minimum clearance should be 4mm, otherwise, you need to add wheel spacers. Caution: It is not sufficient with torsion beam trailing arm axles)
5. Regular maintenance is recommended for the coil-over. Applying WD-40 or a suitable protective spray every 3–4 months can help keep the components clean and moving smoothly.
Introduction
maXpeedingrods'maXpeedingrods-B1 series is ideal for those who want to change the old worn-out strut but improve handling at the same time. It features height adjustable and maintains the OE ride quality to the greatest extent.
Application
Compatible for Ford Fiesta MKVI JA8 All Engines 2008-2019
compatible for Ford Fiesta MK7 JA8 Mark VII (UK models) 2008-2019
Specification
Top mounts：OE top mounts required
Damping adjustable: Not available
Camber adjustable: Not available
Height adjustable: Yes, lowering 0-25mm depending on the vehicle models
Spring Rate Front: 3 kg/mm (168 lbs/in)
Spring Rate Rear:2.4 kg/mm (134.4 lbs/in)
Front spring inner diameter: 62-83 mm
Rear spring inner diameter: 58-62 mm
Spring length Front: 227 mm
Spring length Rear: 260 mm
Spring Preload advised: 7-10 mm
Color: Silver body with golden spring
Package included
Package included：
2x Front coil-overs
2x Rear coil-overs
2x C spanners
Dimension
Package Size: 70*50*20 cm
Weight: 19600 g
Feature
1. 0-25mm(depends on vehicle models) lower height adjustable
2. Dust boot, solid rubber bump stops
3. Aluminum components and steel lower mount brackets designed to balance weight and structural requirements.
4. Simple install, Easy to adjust.
5. Use the vehicle's original upper mounts (not included in our product kit).
Note
1. All modifications must be installed by licensed mechanics and in compliance with your local modification regulations.
2. Please ensure all components are tightened with correct torque specifications (which can be found in the vehicle service manual)before and after installation. Any loose nuts, bolts, or locks will cause noise. Do check and tighten before serious problems happen.
3. Impact wrench is prohibited during the installation, it will loosen or damage the product.
4. Examine the clearance between tires and suspension. ( The minimum clearance should be 4mm, otherwise, you need to add wheel spacers. Caution: It is not sufficient with torsion beam trailing arm axles)
5. Regular maintenance is recommended for the coil-over. Applying WD-40 or a suitable protective spray every 3–4 months can help keep the components clean and moving smoothly.